行业标准规范英汉对照-通用零部件
行业标准规范英汉对照-通用零部件1
1 GB/T 2-1985 紧固件 外螺纹零件的末端 Fasteners--Ends of parts with external thread
2 GB/T 8-1988 方头螺栓 C级 Square head bolts--Product grade C
3 GB/T 10-1988 沉头方颈螺栓 Flat countersunk square neck bolts
4 GB/T 11-1988 沉头带榫螺栓 Flat countersunk nib bolts
5 GB/T 12-1988 半圆头方颈螺栓 Cup head square neck bolts
6 GB/T 13-1988 半圆头带榫螺栓 Cup head nib bolts
7 GB/T 15-1988 大半圆头带榫螺栓 Cup head nib bolts with large head
8 GB/T 22-1976 小六角头导颈螺栓 Bolts, small hexagon head with fit neck
9 GB/T 23-1976 小六角头螺杆带孔螺栓 Bolts, small hexagon head with hole through the shank
10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓 Bolts, small hexagon head with fit neck and hole th
rough the shank
11 GB/T 25-1976 小六角头头部带孔螺栓 Bolts, small hexagon head with holes through the head
12 GB/T 26-1976 小六角头头部带孔导颈螺栓 Bolts, small hexagon head with fit neck and holes t
hrough the head
13 GB/T 27-1988 六角头铰制孔用螺栓 A和B级 Hexagon fit bolts--Product grade A and B
14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓 A和B级 Hexagon fit bolts with Split pin hole on s
hank--Product grade A and B
15 GB/T 29.1-1988 六角头头部带槽螺栓 A和B级 Hexagon bolts with slot on head--Product grade A
and B
16 GB/T 29.2-1988 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
17 GB/T 31.1-1988 六角头螺杆带孔螺栓 A和B级 Hexagon bolts with split pin hole on shank--Prod
uct grade A and B
18 GB/T 31.2-1988 六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank--Re
duced shank--Product grade B
19 GB/T 31.3-1988 六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank-
-Fine pitch thread--Product grade A and B
20 GB/T 32.1-1988 六角头头部带孔螺栓 A和B级 Hexagon bolts with wire holes on head--Product g
rade A and B 21 GB/T 32.2-1988 六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on
head--Reduced shank--Product grade B
22 GB/T 32.3-1988 六角头头部带孔螺栓 细牙 A和B级 Hexagon bolts with wire holes on head--Fine
pitch thread--Product grade A and B
23 GB/T 35-1988 小方头螺栓 B级 Square head bolts with small head--Product grade B
24 GB/T 37-1988 T型槽用螺栓 Bolts for T-Slot
25 GB/T 38-1976 螺栓 技术条件 Bolts--Technical requirements
26 GB/T 39-1988 方螺母 C级 Square nuts--Product grade C
27 GB/T 41-1986 1 型六角螺母 C 级 Hexagon nuts--Style 1--Product grad C
28 GB/T 56-1988 六角厚螺母 Hexagon thick nuts
29 GB/T 61-1976 螺母 技术条件 Nuts--Technical requirements
30 GB/T 62-1988 蝶形螺母 Wing nuts
31 GB/T 63-1988 环形螺母 Lifting nuts
32 GB/T 65-1985 开槽圆柱头螺钉 Slotted cheese head screws
33 GB/T 67-1985 开槽盘头螺钉 Slotted pan head screws
34 GB/T 68-1985 开槽沉头螺钉 Slotted countersunk head screws
35 GB/T 69-1985 开槽半沉头螺钉 Slotted raised countersunk head screws
36 GB/T 70-1985 内六角圆柱头螺钉 Hexagon socket cap head screws
37 GB/T 71-1985 开槽锥端紧定螺钉 Slotted set screws with cone point
38 GB/T 72-1988 开槽锥端定位螺钉 Slotted set screws with cone point
39 GB/T 73-1985 开槽平端紧定螺钉 Slotted set screws with flat point
40 GB/T 74-1985 开槽凹端紧定螺钉 Slotted set screws with cup point
41 GB/T 75-1985 开槽长圆柱端紧定螺钉 Slotted set screws withlong dog point
42 GB/T 77-1985 内六角平端紧定螺钉 Hexagon socket set screws with flat point
43 GB/T 78-1985 内六角锥端紧定螺钉 Hexagon socket set screws with cone point
44 GB/T 79-1985 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
45 GB/T 80-1985 内六角凹端紧定螺钉 Hexagon socket set screws with cup point
46 GB/T 83-1988 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded e
nd
47 GB/T 84-1988 方头凹端紧定螺钉 Square set screws with cup point
48 GB/T 85-1988 方头长圆柱端紧定螺钉 Square set screws with long dog point
49 GB/T 86-1988 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
50 GB/T 89-1976 螺钉 技术条件 Screws--Technical requirements
51 GB/T 90-1985 紧固件验收检查、标志与包装 Acceptance inspection,marking and packaging of fa
steners
52 GB/T 91-1986 开口销 Split pins
53 GB/T 93-1987 标准型弹簧垫圈 Single coil spring lock washers--Normal type
54 GB/T 94.1-1987 弹性垫圈技术条件 弹簧垫圈 Specifications for spring washers--Single coil s
pring lock washers
55 GB/T 94.2-1987 弹性垫圈技术条件 齿形、锯齿锁紧垫圈 Specifications for spring washers--Too
thed lock and serrated lock washers
56 GB/T 94.3-1987 弹性垫圈技术条件 鞍形、波形弹性垫圈 Specifications for spring washers--Cur
ved and wave spring washers
57 GB/T 95-1985 平垫圈-C级 Plain washers--Product grade C
58 GB/T 272-1993 滚动轴承 代号方法 Rolling bearing--Identification code
59 GB/T 273.1-1987 滚动轴承 圆锥滚子轴承 外形尺寸方案 Rolling bearings Tapered roller bearin
gs--Boundary dimensions
60 GB/T 273.3-1988 滚动轴承 向心轴承 外形尺寸方案 Rolling bearings Radial bearings-Boundary
dimensions
61 GB/T 274-1991 滚动轴承 装配倒角极限 Rolling bearing chamfer dimension limits
62 GB/T 275-1993 滚动轴承与轴和外壳的配合 Shaft and housing fits for rolling bearings
63 GB/T 276-1994 滚动轴承 深沟球轴承 外形尺寸 Rolling bearings--Deep groove ball bearings--B
oundary dimensions
64 GB/T 280-1964 带毡封圈的单列向心球轴承 结构型式和基本尺寸 Rolling bearings--Single-row ra
dial ball bearings withfelt seals--Types and basic dimensions
65 GB/T 281-1994 滚动轴承 调心球轴承 外形尺寸 Rolling bearings--Self-aligning ball bearings-
-Boundary dimensions
66 GB/T 283-1994 滚动轴承 圆柱滚子轴承 外形尺寸 Rolling bearings--Cylindrical roller bearing
s-Boundary dimensions
67 GB/T 285-1994 滚动轴承 双列圆柱滚子轴承 外形尺寸 Rolling bearings--Double row cylindrical
roller bearings-Boundary dimensions
68 GB/T 286-1964 双列向心球面滚子轴承 结构型式和基本尺寸 Rolling bearings--Double -row radia
l spherical roller bearings--Types and basic dimensions
69 GB/T 288-1994 滚动轴承 调心滚子轴承 外形尺寸 Rolling bearings--Self-aligning roller beari
ngs-Boundary dimensions
70 GB/T 289-1964 滚针轴承 结构型式和基本尺寸 Needle roller bearings--Types and basic dimensi
ons
71 GB/T 291-1964 螺旋滚子轴承 结构型式和基本尺寸 Rolling bearings with helically wound cylin
drical rollers--Types and basic dimensions
72 GB/T 292-1994 滚动轴承 角接触球轴承 外形尺寸 Rolling bearings--Angular contact ball beari
ngs--Boundary dimensions
73 GB/T 294-1994 滚动轴承 三点和四点接触球轴承 外形尺寸 Rolling bearings--Three point and fo
ur point contact ball bearings--Boundary dimensions
74 GB/T 296-1994 滚动轴承 双列角接触球轴承 外形尺寸 Rolling bearings--Double row angular con
tact ball bearings--Boundary dimensions
75 GB/T 297-1994 滚动轴承 圆锥滚子轴承 外形尺寸 Rolling bearings--Tapered roller bearings--B
oundary dimensions
76 GB/T 299-1995 滚动轴承 双列圆锥滚子轴承 外形尺寸 Rolling bearings--Metric double row tape
red roller bearings--Boundary dimensions
77 GB/T 300-1995 滚动轴承 四列圆锥滚子轴承外形尺寸 Rolling bearings--Four row tapered roller
bearings--Boundary dimensions
78 GB/T 301-1995 滚动轴承 推力球轴承 外形尺寸 Rolling bearings--Thrust ball bearings--Bounda
ry dimensions
79 GB/T 304.1-1988 关节轴承 分类 Spherical plain bearings Classification
80 GB/T 304.2-1988 关节轴承 代号方法 Spherical plain bearings Identification code
81 GB/T 304.3-1990 关节轴承 配合 Spherical plain bearings-Fits
82 GB/T 304.9-1981 向心关节轴承 技术条件 Spherical plain radial bearings, joint type--Techni
cal requirements
83 GB/T 304.10-1989 关节轴承公差 Spherical plain bearings-Tolerances
84 GB/T 307.1-1994 滚动轴承 向心轴承 公差 Rolling bearings--Radial bearings--Tolerances
85 GB/T 307.2-1995 滚动轴承 测量和检验的原则及方法 Rolling bearings--Measuring and gauging p
rinciples and methods
86 GB/T 307.3-1996 滚动轴承 通用技术规则 Rolling bearings--General technical regulations
87 GB/T 307.4-1994 滚动轴承 推力球轴承 公差 Rolling bearings--Thrust ball bearings--Toleranc
es
88 GB/T 308-1989 滚动轴承 钢球 Rolling bearings-Steel balls
89 GB/T 309-1984 滚动轴承 滚针 Rolling bearings--Needle rollers
90 GB/T 794-1993 加强半圆头方颈螺栓 Strengthened cap head square neck bolts
91 GB/T 798-1988 活节螺栓 Eye bolts
92 GB/T 799-1988 地脚螺栓 Eyelet bolts
93 GB/T 800-1988 沉头双榫螺栓 Flat countersunk double nib bolts
94 GB/T 802-1988 组合式盖形螺母 Acorn nuts
95 GB/T 804-1988 球面六角螺母 Hexagon nuts with raised face
96 GB/T 805-1988 扣紧螺母 Tight nuts
97 GB/T 806-1988 滚花高螺母 Knurled nut with collar
98 GB/T 807-1988 滚花薄螺母 Knurled nuts
99 GB/T 808-1988 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
100 GB/T 809-1988 嵌装圆螺母 Insert round nuts
101 GB/T 810-1988 小圆螺母 Small round nuts
102 GB/T 812-1988 圆螺母 Round nuts
103 GB/T 815-1988 端面带孔圆螺母 Round nuts with drilled holes in one face
104 GB/T 816-1988 侧面带孔圆螺母 Round nuts with set pin holes in side
105 GB/T 817-1988 带槽圆螺母 Slotted round nuts
106 GB/T 818-1985 十字槽盘头螺钉 Cross recessed pan head screws
107 GB/T 819-1985 十字槽沉头螺钉 Cross recessed countersunk head screws
108 GB/T 820-1985 十字槽半沉头螺钉 Cross recessed raised countersunk head screws
109 GB/T 821-1988 方头倒角端紧定螺钉 Square set screws with chamfered end
110 GB/T 822-1988 十字槽圆柱头螺钉 Cross recessed cheese head serews
111 GB/T 823-1988 十字槽小盘头螺钉 Cross recessed small pan head screws
112 GB/T 824-1976 圆柱头内花键螺钉 Screws,fluted socket head
113 GB/T 825-1988 吊环螺钉 Eyebolts
114 GB/T 827-1986 标牌铆钉 Rivets for name plate
115 GB/T 828-1988 开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
116 GB/T 829-1988 开槽圆柱端定位螺钉 Slotted setscrews with dog point
117 GB/T 830-1988 开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
118 GB/T 831-1988 开槽无头轴位螺钉 Slotted shoulder screws
119 GB/T 832-1988 开槽带孔球面圆柱头螺钉 Slotted capstan screws
120 GB/T 833-1988 开槽大圆柱头螺钉 Slotted large cheese head screws
121 GB/T 834-1988 滚花高头螺钉 Knurled thumb screws
122 GB/T 835-1988 滚花平头螺钉 Knurled screws
123 GB/T 836-1988 滚花小头螺钉 Knurled screws with small head
124 GB/T 837-1988 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
125 GB/T 838-1988 六角头不脱出螺钉 Hexagon screws with waisted shank
126 GB/T 839-1988 滚花头不脱出螺钉 Knurled thumb screws with waisted shank
127 GB/T 840-1988 塑料滚花头螺钉 Plastic diamond knurlhead screws
128 GB/T 845-1985 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
129 GB/T 846-1985 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
130 GB/T 847-1985 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
131 GB/T 848-1985 小垫圈--A级 Plain washers--Small series--Product grade A
132 GB/T 849-1988 球面垫圈 Weshers with ball face
133 GB/T 850-1988 锥面垫圈 Washers with cone face
134 GB/T 851-1988 开口垫圈 Washers with split
135 GB/T 852-1988 工字钢用方斜垫圈 Square taper washers for I section
136 GB/T 853-1988 槽钢用方斜垫圈 Square taper washers for slot section
137 GB/T 854-1988 单耳止动垫圈 Tab washers with long tab
138 GB/T 855-1988 双耳止动垫圈 Tab washers with long tab and wing
139 GB/T 856-1988 外舌止动垫圈 External tab washers
140 GB/T 858-1988 圆螺母用止动垫圈 Tab washers for round nut
141 GB/T 859-1987 轻型弹簧垫圈 Single coil spring lock washers,Light type
142 GB/T 860-1987 鞍形弹性垫圈 Curved spring washers
143 GB/T 861.1-1987 内齿锁紧垫圈 Lock washers internal teeth
144 GB/T 861.2-1987 内锯齿锁紧垫圈 Serrated lock washers internal teeth
145 GB/T 862.1-1987 外齿锁紧垫圈 Lock washers external teeth
146 GB/T 862.2-1987 外锯齿锁紧垫圈 Serrated lock washers external teeth
147 GB/T 863.1-1986 半圆头铆钉 (粗制) Round head rivets--Black
148 GB/T 863.2-1986 小半圆头铆钉 (粗制) Round head rivets with small head--Black
149 GB/T 864-1986 平锥头铆钉 (粗制) Cone head rivets--Black
150 GB/T 865-1986 沉头铆钉 (粗制) Countersunk head rivets-Black
151 GB/T 866-1986 半沉头铆钉 (粗制) Oval countersunk head rivets--Black
152 GB/T 867-1986 半圆头铆钉 Round head rivets
153 GB/T 868-1986 平锥头铆钉 Cone head rivets
154 GB/T 869-1986 沉头铆钉 Countersunk head rivets
155 GB/T 870-1986 半沉头铆钉 Oval countersunk head rivets
156 GB/T 871-1986 扁圆头铆钉 Flat round head rivets
157 GB/T 872-1986 扁平头铆钉 Thin head rivets
158 GB/T 873-1986 扁圆头半空心铆钉 Oval head semi-tubular rivets
159 GB/T 874-1986 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
160 GB/T 875-1986 偏平头半空心铆钉 Thin head semi-tubular rivet
161 GB/T 876-1986 空心铆钉 Tubular rivets
162 GB/T 877-1986 开尾圆锥销 Taper pins with split
163 GB/T 878-1986 螺纹圆柱销 Parallel pins with external thread
164 GB/T 879-1986 弹性圆柱销 Spring-type straight pins—Slotted
165 GB/T 880-1986 带孔销 Pins with split pin hole
166 GB/T 881-1986 螺尾锥销 Taper pins with external thread
167 GB/T 882-1986 销轴 Clevis pins with head
168 GB/T 883-1986 锥销锁紧挡圈 Lock rings with cone pin
169 GB/T 884-1986 螺钉锁紧挡圈 Lock ring with screw
170 GB/T 885-1986 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
171 GB/T 886-1986 轴肩挡圈 Rings for shoulder
172 GB/T 889-1986 1 型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts (with non-m
etallic insert),style 1
173 GB/T 891-1986 螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw
174 GB/T 892-1986 螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt
175 GB/T 893.1-1986 孔用弹性挡圈--A型 Circlips for holes--Type A
176 GB/T 893.2-1986 孔用弹性挡圈--B型 Circlips for hole--Type B
177 GB/T 894.1-1986 轴用弹性挡圈--A型 Circlips for shaft--Type A
178 GB/T 894.2-1986 轴用弹性挡圈--B型 Circlips for shaft--Type B
179 GB/T 895.1-1986 孔用钢丝挡圈 Roundwire snap rings for hole
180 GB/T 895.2-1986 轴用钢丝挡圈 Roundwire snap rings for shaft
181 GB/T 896-1986 开口挡圈 "E" rings
182 GB/T 897-1988 双头螺柱 bm=1d Double end studs--bm=1d
183 GB/T 898-1988 双头螺柱 bm=1.25d Double end studs bm=1.25d
184 GB/T 899-1988 双头螺柱 bm=1.5d Double end studs bm=1.5d
185 GB/T 900-1988 双头螺柱 bm=2d Double end studs bm=2d
186 GB/T 901-1988 等长双头螺柱 B级 Double end studs (clamping type)--Product grade B
187 GB/T 902.1-1989 手工焊用焊接螺柱 Weld studs for manual welding
188 GB/T 902.2-1989 机动弧焊用焊接螺柱 Weld studs for arc welding
189 GB/T 902.3-1989 储能焊用焊接螺柱 Weld studs for capacitor discharge welding
190 GB/T 921-1986 钢丝锁圈 Round wire circlips
191 GB/T 922-1986 木螺钉技术条件 Specifications for wood screws
192 GB/T 923-1988 盖形螺母 Acorn nuts
193 GB/T 925-1988 轻型六角自锁螺母 Self-locking nuts,hexagon light
194 GB/T 927-1988 球面六角自锁螺母 Self-locking nuts,hexagon sphere
195 GB/T 929-1988 单耳托板自锁螺母 Self-locking nuts,singlelug, anchor
196 GB/T 930-1988 双耳托板自锁螺母 Self-locking nuts,twolug, anchor
197 GB/T 931-1988 角形托板自锁螺母 Self-locking nuts,angle, anchor
198 GB/T 932-1988 气密单耳托板自锁螺母 Self-locking nuts,singlelug, anchor, sealing,
199 GB/T 933-1988 气密双耳托板自锁螺母 Self-locking nuts,twolug, anchor, sealing
200 GB/T 937-1988 成组游动托板自锁螺母 Self-locking nuts, anchor, floating,Gang channel
201 GB/T 938-1988 游动自锁螺母 Self-locking nuts, floating
202 GB/T 939-1988 单耳托板自锁螺母保护罩 Boots for self-locking nuts, singlelug, anchor
203 GB/T 940-1988 双耳托板自锁螺母保护罩 Boots for self-locking nuts,twolug, anchor
204 GB/T 941-1988 角形托板自锁螺母保护罩 Boots for self-locking nuts,angle, anchor
205 GB/T 943-1988 自锁螺母技术条件 Procurement specification for self-locking nuts
206 GB/T 945-1976 十字槽球面中柱头螺钉 Screws,cross recessed,thin raised cheese head
207 GB/T 946-1988 开槽球面圆柱头轴位螺钉 Slotted raised cheese head with shoulder
208 GB/T 947-1988 开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
209 GB/T 948-1988 开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank
210 GB/T 949-1988 开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted s
hank
211 GB/T 950-1986 十字槽圆头木螺钉 Cross recessed round head wood screws
212 GB/T 951-1986 十字槽沉头木螺钉 Cross recessed countersunk head wood screws
213 GB/T 952-1986 十字槽半沉头木螺钉 Cross recessed raised countersunk head wood screws
214 GB/T 953-1988 等长双头螺柱 C级 Double end studs (clamping type)--Product grade C
215 GB/T 954-1986 120°沉头铆钉 120°degree countersunk head rivets
216 GB/T 955-1987 波形弹性垫圈 Wave spring washers
217 GB/T 956.1-1987 锥形锁紧垫圈 Countersunk external toothed lock washers
218 GB/T 956.2-1987 锥形锯齿锁紧垫圈 Countersunk serrated external toothed lock washers
219 GB/T 959.1-1986 挡圈技术条件--弹性挡圈 Specifications for ring—Circlips
220 GB/T 959.2-1986 挡圈技术条件--钢丝挡圈 Specifications for ring—Round wire snap rings
221 GB/T 959.3-1986 挡圈技术条件--切制挡圈 Specifications for ring—Cutting rings
222 GB/T 960-1986 夹紧挡圈 Grip rings
223 GB/T 961-1988 单耳托板自锁螺母垫片 Spacers for self-locking nuts,singlelug, anchor
224 GB/T 962-1988 双耳托板自锁螺母垫片 Spacers for self-locking nuts,twolug, anchor
225 GB/T 963-1988 角形托板自锁螺母垫片 Spacers for self-locking nuts,angle, anchor
226 GB/T 973-1976 十字槽扁圆头螺钉 Screws,cross recessed,oval head
227 GB/T 974-1976 十字槽120°半沉头螺钉 Screws,cross recessed,120°raised countersunk head
228 GB/T 975-1986 管状铆钉 Pipe type rivets
229 GB/T 1007-1976 小六角较扁螺母 Small hexagon medium thin nuts
230 GB/T 1009-1978 螺母专用技术条件 Specified specifications for nuts
231 GB/T 1011-1986 大扁圆头铆钉 Truss head rivets
232 GB/T 1012-1986 120°半沉头铆钉 120°degree oval countersunk rivets
233 GB/T 1013-1986 平锥头半空心铆钉 Cone head semi-tubuler rivets
234 GB/T 1014-1986 大扁圆头半空心铆钉 Truss head semi-tubuar rivets
235 GB/T 1015-1986 沉头半空心铆钉 Countersunk head semi-tublar rivets
236 GB/T 1016-1986 无头铆钉 Headless rivets
237 GB/T 1017-1978 铆钉专用技术条件 Specified specifications for rivets
238 GB/T 1021-1976 角形垂直单耳止动垫圈 Lock washers with angular upturn tab perpendicular t
o the lug
239 GB/T 1022-1976 角形单耳止动垫圈 Lock washers with angular upturn tab in line to the lug
240 GB/T 1023-1976 角形垂直外舌止动垫圈 Lock washers with angular upturn tab perpendicular t
o the external tab
241 GB/T 1024-1976 角形外舌止动垫圈 Lock washers with angular upturn tab in line to the exte
rnal tab
242 GB/T 1030-1988 内球面垫圈 Inner sphere washers
243 GB/T 1047-1995 管道元件的公称通径 Nominal size for pipe components
244 GB/T 1048-1990 管道元件公称压力 Nominal pressure for pipe components
245 GB/T 1095-1979 平键 键和键槽的剖面尺寸 Parallel keys--Dimensions of cross sections and k
eyways
246 GB/T 1096-1979 普通平键 型式尺寸 Plain parallel keys--Types and dimensions
247 GB/T 1097-1979 导向平键 型式尺寸 Feather keys--Types and dimensions
248 GB/T 1098-1979 半圆键 键和键槽的剖面尺寸 Semi-circular (Woodruff) keys--Dimensions of cr
oss sections and keyways
249 GB/T 1099-1979 半圆键 型式尺寸 Woodruff keys--Types and dimensions
250 GB/T 1144-1987 矩形花键尺寸、公差和检验 Straight-sided spline—Dimensions tolerances and
verification
251 GB/T 1168-1976 螺柱技术条件 Studs--Technical requirements
252 GB/T 1228-1991 钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head fo
r steel structures 253 GB/T 1229-1991 钢结构用高强度大六角螺母 High strength large hexagon n
uts for steel structures
254 GB/T 1230-1991 钢结构用高强度垫圈 High strength plain washers for steel structures
255 GB/T 1231-1991 钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件 Specifications of hi
gh strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel stru
ctures
256 GB/T 1237-1988 紧固件的标记方法 Designation system for fasteners
257 GB/T 1337-1988 六角自锁螺母 Self-locking nuts,hexagon
258 GB/T 1338-1988 小六角扁自锁螺母 Self-locking nuts,reduced hexagon oblate
259 GB/T 1339-1988 小六角自锁螺母 Self-locking nuts,reduced hexagon
260 GB/T 1340-1988 成组游动托板自锁螺母支架 Supports for self-locking nuts,anchor floating,G
ang channel
261 GB/T 1356-1988 淅开线圆柱齿轮 基本齿廓 Basic rack tooth profile of involute cylindrical
gears
262 GB/T 1357-1987 渐开线圆柱齿轮模数 Modules of involute cyindrical gears
263 GB/T 1563-1979 楔键 键和键槽的剖面尺寸 Taper keys--Cross section dimensions of keys and
keyways
264 GB/T 1564-1979 普通楔键 型式尺寸 Taper keys for general use--Types and dimensions
265 GB/T 1565-1979 钩头楔键 型式尺寸 Gib-head taper keys--Types and dimensions
266 GB/T 1566-1979 薄型平键 键和键槽的剖面尺寸 Thin flat keys--Cross section dimensions and
keyways
267 GB/T 1567-1979 薄型平键 型式尺寸 Thin flat keys--Types and dimensions
268 GB/T 1840-1989 圆弧圆柱齿轮模数 Modules of cylindrical gear with circular arc profiles
269 GB/T 1974-1980 切向键及其键槽 Tangential keys and keyways
270 GB/T 2362-1990 小模数渐开线圆柱齿轮基本齿廓 Basic rack tooth profile of fine-pitch invol
ute cylindrical gears 271 GB/T 2363-1990 小模数渐开线圆柱齿轮精度 Accuracy of fine-pitch inv
olute cylindrical gears
272 GB/T 2509-1981 滑动轴承铜合金整体轴套形式、尺寸与公差 Copper alloy integrated shaft slee
ves for plain bearings--Types, dimensions and tolerances
273 GB/T 2510-1981 滑动轴承铜合金带挡边整体轴套形式、尺寸与公差 Copper alloy integrated shaf
t sleeves for plain bearings with gears--Types, dimensions and tolerances
274 GB/T 2511-1981 滑动轴承铜合金整体轴套技术条件 Copper alloy integrated shaft sleeves--Tec
hnical requirements
275 GB/T 2555-1981 一般用途管法兰连接尺寸 Pipe flange connectors for ordinary use--Mounting
dimensions
276 GB/T 2556-1981 一般用途管法兰密封面形状和尺寸 Pipe flanges for ordinary use--Sealing sur
faces--Forms and dimensions
277 GB/T 2672-1986 内六角花形盘头螺钉 Hexagon lobular socket pan head screws
278 GB/T 2673-1986 内六角花形沉头螺钉 Hexagon lobular socket countersunk head screws
279 GB/T 2674-1986 内六角花形半沉头螺钉 Hexagon lobular socket raised countersunk head screw
s
280 GB/T 2685-1981 滑动轴承 粉末冶金筒形轴承型式、尺寸与公差 Powder metallurgy plain bearing
--Cylindrical type--Types, dimensions and tolerances
281 GB/T 2686-1981 滑动轴承 粉末冶金带挡边筒形轴承型式、尺寸与公差 Powder metallurgy plain b
earing--Rimed cylindrical type--Types, dimensions and tolerances
282 GB/T 2687-1981 滑动轴承 粉末冶金球形轴承型式、尺寸与公差 Powder metallurgy plain bearing
--Spherical type--Types, dimensions and tolerances
283 GB/T 2688-1981 滑动轴承 粉末冶金轴承技术条件 Powder metallurgy plain bearing--Technical
requirements
284 GB/T 2821-1992 齿轮几何要素代号 Symbols for gear geometrical data
285 GB/T 2889-1994 滑动轴承 术语 Plain bearings--Terms, definitions and classification
286 GB/T 3098.1-1982 紧固件机械性能 螺栓、螺钉和螺柱 Mechanical properties of fasteners--Bol
ts, screws and studs
287 GB/T 3098.2-1982 紧固件机械性能 螺母 Mechanical properties of fasteners--Nuts
288 GB/T 3098.3-1982 紧固件机械性能 紧定螺钉 Mechanical properties of fasteners--Set screws
289 GB/T 3098.4-1986 紧固件机械性能--细牙螺母 Mechanical properties of fasteners--Nuts with
fine pitch thread
290 GB/T 3098.5-1985 紧固件机械性能 自攻螺钉 Mechanical properties of fasteners--Tapping scr
ews
291 GB/T 3098.6-1986 紧固件机械性能 不锈钢螺栓, 螺钉, 螺柱和螺母 Mechanical properties of fa
steners--Stainless steel bolts,screws, studs and nuts
292 GB/T 3098.7-1986 紧固件机械性能 自攻锁紧螺钉 粗牙普通螺纹系列 Mechanical properties of f
asteners--Thread forming screws--Metric coarse thread series
293 GB/T 3098.8-1992 紧固件机械性能 耐热用螺纹连接副 Mechanical properties of fasteners--Com
ponents for bolted connections made mainly from materials with a high temperature strength
294 GB/T 3098.9-1993 紧固件机械性能有效力矩型钢六角锁紧螺母 Mechanical properties of fastene
rs--Prevailing torque type steel hexagon nuts
295 GB/T 3098.10-1993 紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母 Mechanical propert
ies of fasteners--Bolts, screws, studs and nuts made of non-ferrous metals
296 GB/T 3098.11-1995 紧固件机械性能自钻自攻螺钉 Mechanical properties of fasteners--Self-dr
illing tapping screws
297 GB/T 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm Mechanical
properties of fasteners--Torsional test and minimum torques for bolts and screws with nomina
l diameters 1mm to 10mm
298 GB/T 3098.12-1996 紧固件机械性能 螺母锥形保证载荷试验 Mechanical properties of fasteners
--Cone proof load test on nuts
299 GB/T 3099-1982 螺栓、螺钉、螺母及附件名词术语 Bolts, screws, nuts and accessories--Termi
nology and nomenclature
300 GB/T 3103.1-1982 紧固件公差 螺栓、螺钉和螺母 Tolerances for fasteners--Bolts, screws and
nuts
301 GB/T 3103.2-1982 紧固件公差 用于精密机械的螺栓、螺钉和螺母 Tolerances for fasteners--Bol
ts, screws and nuts for fine mechanics
302 GB/T 3103.3-1982 紧固件公差 平垫圈 Tolerances for fasteners--Washers
303 GB/T 3103.4-1992 紧固件公差 耐热用螺纹连接副 Tolerances for fasteners--Components for bo
lted connections made mainly from materials with a high temperature strength
304 GB/T 3104-1982 紧固件 六角产品的对边宽度 Fasteners--Widths across flats of hexagon produ
cts
305 GB/T 3105-1982 螺栓和螺钉的头下圆角半径 Radii under the head of bolts and screws
306 GB/T 3106-1982 螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度 Bolts, screws and studs--N
ominal lengths, and thread lengths for general purpose bolts
307 GB/T 3162-1991 滑动轴承薄壁轴瓦尺寸、结构要素与公差 Plain bearings—Thin-walled bearing
shells—Dimensions, structure elements and tolerances
308 GB/T 3287-1982 可锻铸铁管路连接件技术条件 Technical requirements of malleable cast iron
pipe fittings
309 GB/T 3288-1982 可锻铸铁管路连接件验收规则 Delivery requirements of malleable cast iron p
ipe fittings
310 GB/T 3289.1-1982 可锻铸铁管路连接件型式尺寸 管件结构尺寸表 Malleable cast iron pipe fitt
ings--Type size--Dimensions list of pipe fittings structure
311 GB/T 3289.2-1982 可锻铸铁管路连接件型式尺寸 弯头 内外丝弯头 Malleable cast iron pipe fit
tings--Type size--Elbows male and female elbows
312 GB/T 3289.3-1982 可锻铸铁管路连接件型式尺寸 45°弯头 45°内外丝弯头 Malleable cast iron
pipe fittings--Type size--Elbows 45°, male and female elbows 45°
313 GB/T 3289.4-1982 可锻铸铁管路连接件型式尺寸 异径弯头 Malleable cast iron pipe fittings--
Type size--Reducing elbows
314 GB/T 3289.5-1982 可锻铸铁管路连接件型式尺寸 异径内外丝弯头 Malleable cast iron pipe fitt
ings--Type size--Male and female reducing elbows
315 GB/T 3289.6-1982 可锻铸铁管路连接件型式尺寸 侧孔弯头 Malleable cast iron pipe fittings--
Type size--Side outlet elbows
316 GB/T 3289.7-1982 可锻铸铁管路连接件型式尺寸 月弯 内外丝月弯 外丝月弯 Malleable cast iron
pipe fittings--Type size--Return bends, male and female return bends, thread return bends
317 GB/T 3289.8-1982 可锻铸铁管路连接件型式尺寸 45°月弯45°内外丝月弯45°外丝月弯 Malleable
cast iron pipe fittings--Type size--Long sweep bends 45°，male and female long sweep bends
45°,male long sweep bends 45°
318 GB/T 3289.9-1982 可锻铸铁管路连接件型式尺寸 U型弯头 Malleable cast iron pipe fittings--T
ype size--U-Elbows(return bends)
319 GB/T 3289.10-1982 可锻铸铁管路连接件型式尺寸 三通 内外丝三通 Malleable cast iron pipe fi
ttings--Type size--Tees, male and female tees
320 GB/T 3289.11-1982 可锻铸铁管路连接件型式尺寸 异径内外丝三通 Malleable cast iron pipe fit
tings--Type size--Male and female reducing tees
321 GB/T 3289.12-1982 可锻铸铁管路连接件型式尺寸 中大异径三通 Malleable cast iron pipe fitti
ngs--Type size--Medium-large reducing tees [tees(increasing on the branch)]
322 GB/T 3289.13-1982 可锻铸铁管路连接件型式尺寸 侧大异径三通 Malleable cast iron pipe fitti
ngs--Type size--Lateral-large reducing tees
323 GB/T 3289.14-1982 可锻铸铁管路连接件型式尺寸 中小异径三通 Malleable cast iron pipe fitti
ngs--Type size--Medium-less reducing tees
324 GB/T 3289.15-1982 可锻铸铁管路连接件型式尺寸 侧小异径三通 Malleable cast iron pipe fitti
ngs--Type size--Lateral-less reducing tees
325 GB/T 3289.16-1982 可锻铸铁管路连接件型式尺寸 中小偏心异径三通 Malleable cast iron pipe f
ittings--Type size--Medium-less eccentric reducing tees
326 GB/T 3289.17-1982 可锻铸铁管路连接件型式尺寸 45°三通 Y型三通 Malleable cast iron pipe f
ittings--Type size--Tees45°, Y pieces(tees)
327 GB/T 3289.18-1982 可锻铸铁管路连接件型式尺寸 Y型异径三通 Malleable cast iron pipe fittin
gs--Type size--Y Piece reducing(tees)
328 GB/T 3289.19-1982 可锻铸铁管路连接件型式尺寸 侧孔三通 Malleable cast iron pipe fittings-
-Type size--Side outlet tees
329 GB/T 3289.20-1982 可锻铸铁管路连接件型式尺寸 四通 Malleable cast iron pipe fittings--Typ
e size--Crosses
330 GB/T 3289.21-1982 可锻铸铁管路连接件型式尺寸 异径四通 Malleable cast iron pipe fittings-
-Type size--Reducing crosses
331 GB/T 3289.22-1982 可锻铸铁管路连接件型式尺寸 外接头 内外丝接头 Malleable cast iron pipe
fittings--Type size--Male joints(sockets), male and female joints (sockets)
332 GB/T 3289.23-1982 可锻铸铁管路连接件型式尺寸 无方内接头 Malleable cast iron pipe fitting
s--Type size--No-square inner joint (nipples)
333 GB/T 3289.24-1982 可锻铸铁管路连接件型式尺寸 异径外接头 Malleable cast iron pipe fitting
s--Type size--Reducing male joints (sockets)
334 GB/T 3289.25-1982 可锻铸铁管路连接件型式尺寸 偏心异径外接头 Malleable cast iron pipe fit
tings--Type size--Eccentric reducing male joints (sockets)
335 GB/T 3289.26-1982 可锻铸铁管路连接件型式尺寸 内接头 Malleable cast iron pipe fittings--T
ype size--Inner joints (nipples hexagon)
336 GB/T 3289.27-1982 可锻铸铁管路连接件型式尺寸 异径内接头 Malleable cast iron pipe fitting
s--Type size--Reducing inner joints(nipples hexagon)
337 GB/T 3289.28-1982 可锻铸铁管路连接件型式尺寸 内外螺丝 Malleable cast iron pipe fittings-
-Type size--Male and female screws (bushings)
338 GB/T 3289.29-1982 可锻铸铁管路连接件型式尺寸 通丝外接头 Malleable cast iron pipe fitting
s--Type size--Through thread male joint (sockets)
339 GB/T 3289.30-1982 可锻铸铁管路连接件型式尺寸 锁紧螺母 Malleable cast iron pipe fittings-
-Type size--Backnuts
340 GB/T 3289.31-1982 可锻铸铁管路连接件型式尺寸 外方管堵 Malleable cast iron pipe fittings-
-Type size--Outer-square plugs
341 GB/T 3289.32-1982 可锻铸铁管路连接件型式尺寸 带边外方管堵 Malleable cast iron pipe fitti
ngs--Type size--Outer-square beaded plugs
342 GB/T 3289.33-1982 可锻铸铁管路连接件型式尺寸 内方管堵 Malleable cast iron pipe fittings-
-Type size--Inner-square plugs
343 GB/T 3289.34-1982 可锻铸铁管路连接件型式尺寸 管帽 Malleable cast iron pipe fittings--Typ
e size--Tube caps (caps plugs)
344 GB/T 3289.35-1982 可锻铸铁管路连接件型式尺寸 活接弯头 内外丝活接弯头 Malleable cast iron
pipe fittings--Type size--Union elbows, male and female union elbows
345 GB/T 3289.36-1982 可锻铸铁管路连接件型式尺寸 活接三通 Malleable cast iron pipe fittings-
-Type size--Union tees
346 GB/T 3289.37-1982 可锻铸铁管路连接件型式尺寸 平形活接头 Malleable cast iron pipe fitting
s--Type size--Parallel unions
347 GB/T 3289.38-1982 可锻铸铁管路连接件型式尺寸 锥形活接头 Malleable cast iron pipe fitting
s--Type size--Taper unions
348 GB/T 3289.39-1982 可锻铸铁管路连接件型式尺寸 平形活接头垫圈 Malleable cast iron pipe fit
tings--Type size--Parallel union gaskets
349 GB/T 3374-1992 齿轮基本术语 Basic terminology of gears
350 GB/T 3478.1-1995 圆柱直齿渐开线花键模数 基本齿廓 公差 Straight cylindrical involute spli
nes--Modules, basic rack profiles and tolerances
351 GB/T 3478.2-1995 圆柱直齿渐开线花键 30°压力角 尺寸表 Straight cylindrical involute spli
nes--30°pressure angle dimenslons tables
352 GB/T 3478.3-1995 圆柱直齿渐开线花键 37.5°压力角 尺寸表 Straight cylindrical involute sp
lines--37.5°pressure angle dimensions tables
353 GB/T 3478.4-1995 圆柱直齿渐开线花键 45°压力角 尺寸表 Straight cylindrical involute spli
nes--45°pressure angle dimensions tables
354 GB/T 3478.5-1995 圆柱直齿渐开线花键 检验方法 Straight cylindrical involute splines--Insp
ection methods
355 GB/T 3478.6-1995 圆柱直齿渐开线花键 30°压力角 M值和W值 Straight cylindrical involute sp
lines--30°pressurengle M and W values
356 GB/T 3478.7-1995 圆柱直齿渐开线花键 37.5°压力角 M值和W值 Straight cylindrical involute
splines--37.5°pressure angle M and W values
357 GB/T 3478.8-1995 圆柱直齿渐开线花键 45°压力角 M值和W值 Straight cylindrical involute sp
lines--45°pressure angle-M and W values
358 GB/T 3478.9-1995 圆柱直齿渐开线花键 量棒 Straight cylindrical involute splines--Measurin
g pin
359 GB/T 3507-1983 机械式联轴器公称扭矩系列 Nominal torque series of the mechanical coupling
360 GB/T 3632-1995 钢结构用扭剪型高强度螺栓连接副 Sets of torshear type high strength bolt h
exagon nut and plain washer for steel structures
361 GB/T 3633-1995 钢结构用扭剪型高强度螺栓连接副 技术条件 Technical requirement for sets of
torshear type high strength bolt hexagon nut and plain washer for steel structures
362 GB/T 3733.1-1983 卡套式端直通管接头 Straight thread connector--Assembly
363 GB/T 3733.2-1983 卡套式端直通接头体 Straight thread connector--Body
364 GB/T 3734.1-1983 卡套式锥螺纹直通管接头 Male connector--Assembly
365 GB/T 3734.2-1983 卡套式锥螺纹直通接头体 Male connector--Body
366 GB/T 3735.1-1983 卡套式端直通长管接头 Straight thread long connector--Assembly
367 GB/T 3735.2-1983 卡套式端直通长接头体 Straight thread long connector--Body
368 GB/T 3736.1-1983 卡套式锥螺纹长管接头 Male long connector--Assembly
369 GB/T 3736.2-1983 卡套式锥螺纹长接头体 Male long connector--Body
370 GB/T 3737.1-1983 卡套式直通管接头 Union--Assembly
371 GB/T 3737.2-1983 卡套式直通接头体 Union--Body
372 GB/T 3738.1-1983 卡套式端直角管接头 Straight thread elbow--Assembly
373 GB/T 3738.2-1983 卡套式端直角接头体 Straight thread elbow--Body
374 GB/T 3739.1-1983 卡套式锥螺纹直角管接头 Male elbow--Assembly
375 GB/T 3739.2-1983 卡套式锥螺纹直角接头体 Male elbow--Body
376 GB/T 3740.1-1983 卡套式直角管接头 Union elbow--Assembly
377 GB/T 3740.2-1983 卡套式直角接头体 Union elbow--Body
378 GB/T 3741.1-1983 卡套式端三通管接头 Straight thread branch tee--Assembly
379 GB/T 3741.2-1983 卡套式端三通接头体 Straight thread branch tee--Body
380 GB/T 3742.1-1983 卡套式锥螺纹三通管接头 Male branch tee-Assembly
381 GB/T 3742.2-1983 卡套式锥螺纹三通接头体 Male branch tee--body
382 GB/T 3743.1-1983 卡套式端直角三通管接头 Straight thread run tee--Assembly
383 GB/T 3743.2-1983 卡套式端直角三通接头体 Straight thread run tee--Body
384 GB/T 3744.1-1983 卡套式锥螺纹直角三通管接头 Male run tee--Assembly
385 GB/T 3744.2-1983 卡套式锥螺纹直角三通接头体 Male run tee--Body
386 GB/T 3745.1-1983 卡套式三通管接头 Union tee--Assembly
387 GB/T 3745.2-1983 卡套式三通接头体 Union tee--Body
388 GB/T 3746.1-1983 卡套式四通管接头 Union cross-Assembly
389 GB/T 3746.2-1983 卡套式四通接头体 Union cross--Body
390 GB/T 3747.1-1983 卡套式焊接管接头 Weld male connector-Assembly
391 GB/T 3747.2-1983 卡套式焊接接头体 Weld male connector--Body
392 GB/T 3748.1-1983 卡套式隔壁直通管接头 Bulkhead union--Assmbly
393 GB/T 3748.2-1983 卡套式隔壁直通接头体 Bulkhead union--Body
394 GB/T 3749.1-1983 卡套式隔壁直角管接头 Bulkhead union elbow--Assembly
395 GB/T 3749.2-1983 卡套式隔壁直角接头体 Bulkhead union elbow--Body
396 GB/T 3750.1-1983 卡套式铰接管接头 Angle swivel screw--Assembly
397 GB/T 3750.2-1983 卡套式铰接接头体 Angle swivel screw--Body
398 GB/T 3750.3-1983 卡套式铰接六角螺栓 Hollow screws
399 GB/T 3751.1-1983 卡套式压力表管接头 Connector for pressure gauge--Assembly
400 GB/T 3751.2-1983 卡套式压力表接头体 Connector for pressure gauge-Boby
~
401 GB/T 3752.1-1983 卡套式组合直角管接头 Adjustable elbow--Assembly
402 GB/T 3752.2-1983 卡套式组合直角接头体 Adjustable elbow--Body
403 GB/T 3753.1-1983 卡套式组合三通管接头 Adjustable T-unions--Assembly
404 GB/T 3753.2-1983 卡套式组合三通接头体 Adjustable T-unions--Body
405 GB/T 3754.1-1983 卡套式端对接直通管接头 Straight thread connector for butt joints--Assem
bly
406 GB/T 3754.2-1983 卡套式端对接直通接头体 Straight thread connector for butt joints--Body
407 GB/T 3755.1-1983 卡套式锥螺纹对接直通管接头 Male connector for butt joints--Assembly
408 GB/T 3755.2-1983 卡套式锥螺纹对接直通接头体 Male connector for butt joints--Body
409 GB/T 3756.1-1983 卡套式对接直通管接头 Union for butt joints--Assembly
410 GB/T 3756.2-1983 卡套式对接直通接头体 Union for butt joints--Body
411 GB/T 3757.1-1983 卡套式端对接直角管接头 Straight thread elbow for butt joints--Assembly
412 GB/T 3757.2-1983 卡套式端对接直角接头体 Straight thread elbow for butt joints--Body
413 GB/T 3758.1-1983 卡套式锥螺纹对接直角管接头 Male elbow for butt joints--Assembly
414 GB/T 3758.2-1983 卡套式锥螺纹对接直角接头体 Male elbow for butt joints--Body
415 GB/T 3759-1983 卡套式管接头用螺母 Bite type tube fittings--Nuts
416 GB/T 3760-1983 卡套式管接头用对接螺母 Bite type tube fittings--Nuts for butt joints
417 GB/T 3761-1983 卡套式管接头用锥体环 Bite type tube fittings--Pressure bush for butt join
ts
418 GB/T 3762-1983 卡套式管接头用尖角密封垫圈 Bite type tube fittings--Tipping washer
419 GB/T 3763-1983 卡套式管接头用六角薄螺母 Bite type tube fittings--Hexagon thin nuts
420 GB/T 3764-1983 卡套 Ferrule
421 GB/T 3765-1983 卡套式管接头技术条件 Specification for bite type tube fittings
422 GB/T 3832.1-1983 拉刀矩形柄 型式和基本尺寸 Rectangular shanks for broaches--Types and ma
in dimensions 423 GB/T 3832.2-1983 拉刀圆柱形前柄型式和基本尺寸 Round shanks for broaches--T
ypes and main dimensions
424 GB/T 3832.3-1983 拉刀圆柱形后柄型式和基本尺寸 Round follower end for broaches--Types and
main dimensions
425 GB/T 3858-1993 液力传动术语 Hydrodynamic drive terminology
426 GB/T 3882-1995 滚动轴承 外球面球轴承和偏心套外形尺寸 Rolling bearings--Insert bearings a
nd eccentric looking collars --Boundary dimensions
427 GB/T 3944-1983 关节轴承 词汇 Spherical plain bearing,joint type--Vocabulary
428 GB/T 4140-1993 输送用平顶链和链轮 Flat-top chains and associated chainwheels for conveyo
rs
429 GB/T 4199-1984 滚动轴承公差定义 Rolling bearings--Tolerances-definitions
430 GB/T 4222-1991 杆端关节轴承 外形尺寸和公差 Spherical plain bearing rod ends—Boundary di
mensions and tolerances
431 GB/T 4323-1984 弹性套柱销联轴器 Pin coupling with elastic sleeve
432 GB/T 4603-1984 滚针轴承 重系列 尺寸和公差 Needle roller bearings--Heavy series--Dimensio
ns and tolerances
433 GB/T 4604-1993 滚动轴承 径向游隙 Rolling bearings--Radial internal clearance
434 GB/T 4646-1991 GEC...FSA 型自润滑向心关节轴承外形尺寸 GEC...FSA type maintenance-free sp
herical plain radia lbearings, joint type—Boundary dimensions
435 GB/T 4648-1996 滚动轴承 圆锥滚子轴承 凸缘外圈 外形尺寸 Rolling bearings--Metric tapered
roller bearings--Flanged cups--Boundary dimensions
436 GB/T 4661-1989 滚动轴承 圆柱滚子 Rolling bearings-cylindrical rollers
437 GB/T 4662-1993 滚动轴承 额定静负荷 Rolling bearings--Static load ratings
438 GB/T 4663-1994 滚动轴承 推力圆柱滚子轴承 外形尺寸 Rolling bearings--Cylindrical thrust r
oller bearings--Boundary dimensions
439 GB/T 4982-1985 夹紧型真空快卸法兰 Vacuum technology clamped type quick release flange
440 GB/T 5014-1985 弹性柱销联轴器 Elastic pin coupling
441 GB/T 5015-1985 弹性柱销齿式联轴器 Gear coupling with elastic pin
442 GB/T 5267-1985 螺纹紧固件电镀层 Electroplated coatings on threaded fasteners
443 GB/T 5269-1985 传动及输送用双节距精密滚子链和链轮 Double pitch precision roller chains a
nd chain wheels for transmission and conveyors
444 GB/T 5272-1985 梅花形弹性联轴器 Coupling with elastic spider
445 GB/T 5276-1985 紧固件 螺栓、螺钉、螺柱及螺母尺寸代号和标注 Fasteners--Bolts,screws,studs
and nuts--Symbols and designations of dimensions
446 GB/T 5277-1985 紧固件 螺栓和螺钉通孔 Fasteners--Clearance holes for bolts and screws
447 GB/T 5278-1985 紧固件 开口销孔和金属丝孔 Fasteners--Split pin holes and wireholes
448 GB/T 5279-1985 沉头螺钉 头部形状和测量 Countersunk head screws--Head configuration and g
auging
449 GB/T 5280-1985 自攻螺钉用螺纹 Tapping screws thread
450 GB/T 5281-1985 内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
451 GB/T 5282-1985 开槽盘头自攻螺钉 Slotted pan head tapping screws
452 GB/T 5283-1985 开槽沉头自攻螺钉 Slotted countersunk head tapping screws
453 GB/T 5284-1985 开槽半沉头自攻螺钉 Slotted raised countersunk head tapping screws
454 GB/T 5285-1985 六角头自攻螺钉 Hexagon head tapping screws
455 GB/T 5286-1985 螺栓、螺钉和螺母用平垫圈 总方案 Plain washers for bolts,screws and nuts--
General plan
456 GB/T 5287-1985 特大垫圈 C级 Plain washers--Extra large series--Product grade C
457 GB/T 5625.1-1985 扩口式端直通管接头 Flared type tube fittings--Straight thread connector
--Assembly
458 GB/T 5625.2-1985 扩口式端直通管接头体 Flared type tube fittings--Straight thread connect
or--Body
459 GB/T 5626.1-1985 扩口式锥螺纹直通管接头 Flared type tube fittings--Male connector--Assem
bly
460 GB/T 5626.2-1985 扩口式锥螺纹直通管接头体 Flared type tube fittings--Male connector-Body
461 GB/T 5627.1-1985 扩口式锥螺纹长管接头 Flared typed tube fittings--Straight taread long c
onnector--Assembly
462 GB/T 5627.2-1985 扩口式锥螺纹长管接头体 Flared type tube fittings--Straight thread long
connector--Body
463 GB/T 5628.1-1985 扩口式直通管接头 Flared type tube fittings--Union--Assembly
464 GB/T 5628.2-1985 扩口式直通管接头体 Flared type tube fittings--Union--Body
465 GB/T 5629.1-1985 扩口式锥螺纹直角管接头 Flared type tube fittings--Male elbow--Assembly
466 GB/T 5629.2-1985 扩口式锥螺纹直角管接头体 Flared type tube fittings--Male elbow--Body
467 GB/T 5630.1-1985 扩口式直角管接头 Flared type tube fittings--Union elbow--Assembly
468 GB/T 5630.2-1985 扩口式直角管接头体 Flared type tube fittings--Union elbow--Body
469 GB/T 5631.1-1985 扩口式可调向端直角管接头 Flared type tube fittings--Straight thread elb
ow-- Assembly
470 GB/T 5631.2-1985 扩口式可调向端直角管接头体 Flared type tube fittings--Straight thread e
lbow--Body
471 GB/T 5632.1-1985 扩口式组合直角管接头 Flared type tube fittings--Swivel elbow--Assembly
472 GB/T 5632.2-1985 扩口式组合直角管接头体 Flared type tube fittings--Swivel elbow--Body
473 GB/T 5633.1-1985 扩口式可调向端三通管接头 Flared type tube fittings--Straight thread bra
nch tee--Assembly
474 GB/T 5633.2-1985 扩口式可调向端三通管接头体 Flared type tube fittings--Straight thread b
ranch tee --Body
475 GB/T 5634.1-1985 扩口式组合直角三通管接头 Flared type tube fittings--Swivel run tee--Ass
embly
476 GB/T 5634.2-1985 扩口式组合直角三通管接头体 Flared type tube fittings--Swivel run tee--B
ody
477 GB/T 5635.1-1985 扩口式锥螺纹三通管接头 Flared type tube fittings--Male branch tee--Asse
mbly
478 GB/T 5635.2-1985 扩口式锥螺纹三通管接头体 Flared type tube fittings--Male branch tee--Bo
dy
479 GB/T 5636.1-1985 扩口式变径锥螺纹三通管接头 Flared type tube fittings--Male branch tee r
educer-- Assembly
480 GB/T 5636.2-1985 扩口式变径锥螺纹三通管接头体 Flared type tube fittings--Male branch tee
reducer--Body
481 GB/T 5637.1-1985 扩口式可调向端直角三通管接头 Flared type tube fittings--Straight thread
run tee-- Assembly 482 GB/T 5637.2-1985 扩口式可调向端直角三通管接头体 Flared type tube fitt
ings--Straight thread run tee-- Body
483 GB/T 5638.1-1985 扩口式组合三通管接头 Flared type tube fittings--Swivel branch tee--Asse
mbly
484 GB/T 5638.2-1985 扩口式组合三通管接头体 Flared typed tube fittings--Swivel branch tee--B
ody
485 GB/T 5639.1-1985 扩口式三通管接头 Flared type tube fittings--Union tee--Assembly
486 GB/T 5639.2-1985 扩口式三通管接头体 Flared type tube fittings--Union tee--Boby
487 GB/T 5640.1-1985 扩口式三通变径管接头 Flared type tube fittings--Union tee reducer--Asse
mbly
488 GB/T 5640.2-1985 扩口式三通变径管接头体 Flared type tube fittings--Union tee reducer--Bo
dy
489 GB/T 5641.1-1985 扩口式四通管接头 Flared type tube fittings--Union cross--Assembly
490 GB/T 5641.2-1985 扩口式四通管接头体 Flared type tube fittings--Union cross--Body
491 GB/T 5642.1-1985 扩口式焊接管接头 Flared type tube fittings--Weld male connector--Assemb
ly
492 GB/T 5642.2-1985 扩口式焊接管接头体 Flared type tube fittings--Weld male connector--Body
493 GB/T 5643.1-1985 扩口式隔壁直通管接头 Flared type tube fittings--Bulkhead union--Assembl
y
494 GB/T 5643.2-1985 扩口式隔壁直通管接头体 Flared type tube fittings--Bulkhead union--Body
495 GB/T 5644.1-1985 扩口式隔壁直角管接头 Flared type tube fittings--Bulkhead union elbow--A
ssembly
496 GB/T 5644.2-1985 扩口式隔壁直角管接头体 Flared type tube fittings--Bulkhead union elbow-
-Body
497 GB/T 5645.1-1985 扩口式压力表管接头 Flared type tube fittings--Connector for pressure ga
uge--Assembly
498 GB/T 5645.2-1985 扩口式压力表管接头体 Flared type tube fittings--Connector for pressure
gauge--Body
499 GB/T 5646-1985 扩口式管接头管套 Flared type tube fittings--Sleeve
500 GB/T 5647-1985 扩口式 A 型管接头螺母 Flared type tube fittings--Style A nut
501 GB/T 5648-1985 扩口式 B 型管接头螺母 Flared type tube fittings--Style B nut
502 GB/T 5649-1985 扩口式管接头锁紧螺母 Flared type tube fittings--Locknut
503 GB/T 5650-1985 扩口式管接头空心螺栓 Flared type tube fittings--Inverted flare bolts
504 GB/T 5651-1985 扩口式管接头密合垫 Flared type tube fittings--Seat insert
505 GB/T 5652-1985 扩口式管接头锁紧螺母垫圈 Flared type tube fittings--Back-up washer
506 GB/T 5653-1985 扩口式管接头技术条件 Specification for flared type tube fittings
507 GB/T 5779.1-1986 紧固件表面缺陷--螺栓、螺钉和螺柱--一般要求 Surface discontinuities of f
asteners on bolts, screws and studs for general requirements
508 GB/T 5779.2-1986 紧固件表面缺陷--螺母--一般要求 Surface discontinuities of fasteners on
nuts for general requirements
509 GB/T 5779.3-1986 紧固件表面缺陷--螺栓、螺钉和螺柱--特殊要求 Surface discontinuities of f
asteners on bolts screws and studs—Special requirements
510 GB/T 5780-1986 六角头螺栓--C级 Hexagon head bolts—Product grade C
511 GB/T 5781-1986 六角头螺栓--全螺纹--C级 Hexagon head bolts—Full thread—Product grade C
512 GB/T 5782-1986 六角头螺栓--A和B级 Hexagon head bolts—Product grades A and B
513 GB/T 5783-1986 六角头螺栓--全螺纹 A和B级 Hexagon head bolts—Full thread—Product grades
A and B
514 GB/T 5784-1986 六角头螺栓--细杆 B级 Hexagon head bolts—Reduced shank—Product grade B
515 GB/T 5785-1986 六角头螺栓--细牙--A和B级 Hexagon head bolts—Fine pitch thread—Product g
rades A and B
516 GB/T 5786-1986 六角头螺栓--细牙--全螺纹--A和B级 Hexagon head bolts—Fine pitch thread—F
ull thread—Product grades A and B
517 GB/T 5787-1986 六角法兰面螺栓--B级 Hexagon flange bolts—Product grade B
518 GB/T 5788-1986 六角法兰面螺栓--细杆--B级 Hexagon flange bolts--Reduced shank--Product gr
ade B
519 GB/T 5789-1986 六角法兰面螺栓--加大系列--B级 Hexagon flange bolts—Heavy series—Product
grade B
520 GB/T 5790-1986 六角法兰面螺栓--加大系列--细杆--B级 Hexagon flange bolts—Heavg eries--Pr
oduct grade B
521 GB/T 5800-1986 滚动轴承 仪器精密轴承 Rolling bearings--Instrument precision bearings
522 GB/T 5801-1994 滚动轴承 轻中系列滚针轴承 外形尺寸和公差 Rolling bearings--Light and medi
um series needle roller bearings--Boundary dimensions and tolerances
523 GB/T 5837-1993 液力偶合器 型式和基本参数 Fluid coupling--Types and basic specifications
524 GB/T 5843-1986 凸缘联轴器 Flanged coupling
525 GB/T 5844-1986 轮胎式联轴器 Coupling with rubber tyre element
526 GB/T 5859-1994 滚动轴承 推力调心滚子轴承 外形尺寸 Rolling bearings--Self-aligning thrust
roller bearings--Boundary dimensions
527 GB/T 5868-1986 滚动轴承安装尺寸 Dimensions for mounting rolling bearings
528 GB/T 6069-1985 滚子链联轴器 Roller chain coupling
529 GB/T 6073-1985 LT 型高弹性摩擦离合器 Type LT highly elastic frictionclutch
530 GB/T 6074-1995 板式链、端接头及槽轮 Leaf chains, clevises and sheaves
531 GB/T 6076-1985 传动用短节距精密套筒链 Short pitch transmission precision bush chains
532 GB/T 6170-1986 1型六角螺母 A和B级 Hexagon nuts, style 1--Product grades A and B
533 GB/T 6171-1986 1型六角螺母 细牙 A和B级 Hexagon nuts, style 1--Fine pitch thread--Product
gra des A and B
534 GB/T 6172-1986 六角薄螺母 A和B级 倒角 Hexagon thin nuts--Product grades A and B--Chamfer
ed
535 GB/T 6173-1986 六角薄螺母 细牙 A和B级 Hexagon thin nuts--Fine pitch thread--Product grad
es A and B
536 GB/T 6174-1986 六角薄螺母 B级 无倒角 Hexagon thin nuts--Product grade B--Unchamfered
537 GB/T 6175-1986 2型六角螺母 A和B级 Hexagon nuts, style 2--Product grades A and B
538 GB/T 6176-1986 2型六角螺母 细牙 A和B级 Hexagon nuts, style 2--Fine pitch thread--Product
grades A and B 539 GB/T 6177-1986 六角法兰面螺母 A级 Hexagon nuts with flange--Product grade
A
540 GB/T 6178-1986 1型六角开槽螺母 A和B级 Hexagon slotted and castle nuts, style 1--Product
grades A and B
541 GB/T 6179-1986 1型六角开槽螺母 C级 Hexagon slotted nuts, style 1--Product grade C
542 GB/T 6180-1986 2型六角开槽螺母 A和B级 Hexagon slotted and castle nuts,style 2--Product g
rades A and B
543 GB/T 6181-1986 六角开槽薄螺母 A和B级 Hexagon thin slotted nuts--Product grades A and B
544 GB/T 6182-1986 2型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts (with non-m
etallic insert), style 2
545 GB/T 6183-1986 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with fla
nge (with non-metallic insert)
546 GB/T 6184-1986 1型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts, styl
e 1
547 GB/T 6185-1986 2型全金属六角锁紧螺母 5,8,10和12级 Prevailing torque type all-metal hexag
on nuts, style 2--Property classes 5,8, 10 and 12
548 GB/T 6186-1986 2型全金属六角锁紧螺母 9级 Prevailing torque type all-metal hexagon nuts,
style 2--Property class 9
549 GB/T 6187-1986 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts wi
th flange
550 GB/T 6188-1986 紧固件用六角花形 T型 Hexagon lobular for fasteners--Type T
551 GB/T 6189-1986 紧固件用六角花形 E型 Hexagon lobular for fasteners--Type E
552 GB/T 6190-1986 内六角花形圆柱头螺钉 4.8级 Hexagon lobular socket head cap screws--Proper
ty class 4.8
553 GB/T 6191-1986 内六角花形圆柱头螺钉 8.8级 Hexagon lobular socket head cap screws--Proper
ty class 8.8
554 GB/T 6333-1986 电力液压块式制动器 The electro-hydraulic double-shoe brakes
555 GB/T 6334-1986 直流电磁铁块式制动器 DC-electromagnet double-shoe brakes
556 GB/T 6391-1995 滚动轴承 额定动载荷和额定寿命 Rolling bearings--Dynamic load ratings and
rating life
557 GB/T 6413-1986 渐开线圆柱齿轮胶合承载能力计算方法 Calculation of scuffing load capacity
for involute cylindrical gears
558 GB/T 6443-1986 渐开线圆柱齿轮图样上应注明的尺寸数据 Involute cylindrical gears--Informat
ion of the dimensional data to be given on the drawing
559 GB/T 6445.1-1996 滚动轴承 滚轮滚针轴承 外形尺寸 Rolling bearings Needle roller bearings-
-Track rollers--Boundary dimensions
560 GB/T 6445.2-1996 滚动轴承 滚轮滚针轴承 公差 Rolling bearings--Needle roller bearings-Tra
ck rollers--Tolerances
561 GB/T 6559-1986 自攻锁紧螺钉的螺杆 粗牙普通螺纹系列 Screw thread shanks for thread formin
g screw--Metric coarse thread series
562 GB/T 6560-1986 十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
563 GB/T 6561-1986 十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming scr
ews
564 GB/T 6562-1986 十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head thread fo
rming screws
565 GB/T 6563-1986 六角头自攻锁紧螺钉 Hexagon head thread forming screws
566 GB/T 6564-1986 内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws
567 GB/T 6930-1986 滚动轴承词汇 Rolling bearings--Vocabulary
568 GB/T 6931.1-1986 带传动基本术语 Drives using belt--Basic terminology
569 GB/T 6931.2-1986 V 带传动术语 Drives using V-belts and grooved pulleys--Terminology
570 GB/T 6931.3-1986 同步带传动术语 Synchronous belt drives--Terminology
571 GB/T 7217-1987 凸缘外圈向心球轴承 凸缘尺寸 Radial ball bearings with flanged outer ring-
-Flange dimensions 572 GB/T 7218-1995 滚动轴承 凸缘外圈微型向心球轴承外形尺寸 Rolling bearin
gs--Miniature radial ball bearings with flanged outer ring Boundary dimensions
573 GB/T 7244-1987 重型弹簧垫圈 Single coil spring lock washers, Heavy type
574 GB/T 7245-1987 鞍形弹簧垫圈 Curved single coil spring lock washers
575 GB/T 7246-1987 波形弹簧垫圈 Wave single coil spring lock washers
576 GB/T 7308-1987 滑动轴承薄壁翻边轴瓦尺寸、公差及检验方法 Plain bearings--Thin-walled flan
ged half bearings--Dimensions, tolerances and methods of checking
577 GB/T 7549-1987 球笼式同步万向联轴器型式、基本参数和主要尺寸 Synchronizing universal coup
ling with ball and sacket--Type, foundational parameters and main dimensions
578 GB/T 7550-1987 球笼式同步万向联轴器试验方法 Synchroizing universal coupling with ball an
d sacket
579 GB/T 7559-1987 纤维增强塑料层板螺栓连接挤压强度试验方法 FRP Laminates-test method for be
aring strength by bolted joints
580 GB/T 7809-1995 滚动轴承 外球面球轴承座外形尺寸 Roliing bearings--Housings for insert bea
ring boundary dimensions
581 GB/T 7810-1995 滚动轴承 带座外球面球轴承外形尺寸 Rolling bearings--Insert bearing units
boundary dimensions
582 GB/T 7811-1987 滚动轴承参数符号 Rolling bearings--Symbols for quantities
583 GB/T 7948-1987 塑料轴承极限PV试验方法 Test method for PV limit of plastics bearings
584 GB/T 8259-1987 卡箍式柔性管接头技术条件 Specification for flexible coupling of housing
585 GB/T 8260-1987 卡箍式柔性环型管接头 Flexible coupling of housing for pipe end with rib r
ing
586 GB/T 8261-1987 卡箍式柔性肩型管接头 Flexible coupling of housing for pipe end with shoul
der
587 GB/T 8262-1987 圆头椭圆颈螺栓 Bolts,round head with oval neck
588 GB/T 8350-1987 输送链、附件和链轮 Conveyor chains, attachments and chain wheels
589 GB/T 8542-1987 透平齿轮传动装置技术条件 Spcification for turbine gearings
590 GB/T 8597-1988 滚动轴承包装 Rolling bearings-packaging and packing
591 GB/T 9065.1-1988 液压软管接头 连接尺寸 扩口式 Hydraulic fluid power--Hose connector--Con
necting dimension (Part Ⅰ--Flare type)
592 GB/T 9065.2-1988 液压软管接头 连接尺寸 卡套式 Hydraulic fluid power--Hose connector--Con
necting dimension (Part Ⅱ--Insert type)
593 GB/T 9065.3-1988 液压软管接头 连接尺寸 焊接式或快换式 Hydraulic fluid power--Hose connec
tor--Connecting dimension (Part Ⅲ--Welding or quick-action type)
594 GB/T 9074.1-1988 十字槽盘头螺钉和平垫圈组合件 Cross recessed pan head screw and plain wa
sher assemblies
595 GB/T 9074.2-1988 十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and
serrated lock washer external teeth assemblies
596 GB/T 9074.3-1988 十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single
coil spring lock washer assemblies
597 GB/T 9074.4-1988 十字槽盘头螺钉, 弹簧垫圈和平垫圈组合件 Cross recessed pan head screw,si
ngle coil spring lock washer and plain washer assemblies
598 GB/T 9074.5-1988 十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw and
small plain washer assemblies
599 GB/T 9074.6-1988 十字槽小盘头螺钉和大垫圈组合件 Cress recessed small pan head serew and
big plain washer assemblies
600 GB/T 9074.7-1988 十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw an
d single coil spring lock washer assemblies
601 GB/T 9074.8-1988 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 Cross recessed small pan head
screw,single coil spring lock washer and plain washer assemblies
602 GB/T 9074.9-1988 十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head scre
w and countersunk serrated external toothed lock washer assemblies
603 GB/T 9074.10-1988 十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk
head screw and countersunk external toothed lock washer assemblies
604 GB/T 9074.11-1988 十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with in
dentation and plain washer assemblies
605 GB/T 9074.12-1988 十字槽凹穴六角头螺栓和弹簧垫圈组合件 Cross recessed hexagon bolt with
indentation and single coil spring lock washer assemblies
606 GB/T 9074.13-1988 十字槽凹穴六角头螺栓, 弹簧垫圈和平垫圈组合件 Cross recessed hexagon bo
lt with indentation, single coil lock washer and plain washer assemblies
607 GB/T 9074.14-1988 六角头螺栓和平垫圈组合件 Hexagon head bolt and plain washer assemblies
608 GB/T 9074.15-1988 六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lo
ck washer assemblies
609 GB/T 9074.16-1988 六角头螺栓和外锯齿锁紧垫圈组合件 Hexagon head bolt and serrated lock w
asher external teeth assemblies
610 GB/T 9074.17-1988 六角头螺栓, 弹簧垫圈和平垫圈组合件 Hexagon head bolt, single coil spri
ng lock washer and plain washer assemblies
611 GB/T 9074.18-1988 十字槽盘头自攻螺钉和平垫圈组合件 Cross recessed pan head tapping screw
and plain washer assemblies
612 GB/T 9074.19-1988 十字槽盘头自攻螺钉和大垫圈组合件 Cross recessed pan head tapping screw
and large plain washer assemblies
613 GB/T 9074.20-1988 十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tap
ping sorew with indentation and plain washer assemblies
614 GB/T 9074.21-1988 十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tap
ping screw with indentation and large plain washer assemblies
615 GB/T 9074.22-1988 六角头自攻螺钉和平垫圈组合件 Hexagon head tapping screw and plain wash
er assemblies
616 GB/T 9074.23-1988 六角头自攻螺钉和大垫圈组合件 Hexagon head tapping screw and big washer
assemblies
617 GB/T 9074.24-1988 组合件用平垫圈 Plain washer for assembly
618 GB/T 9074.25-1988 组合件用大垫圈 Big plain washer for assembly
619 GB/T 9074.26-1988 组合件用弹簧垫圈 Single coil spring lock washer for assembly
620 GB/T 9074.27-1988 组合件用外锯齿锁紧垫圈 Serrated lock washer external teeth for assembl
y
621 GB/T 9074.28-1988 组合件用锥形锁紧垫圈 Countersunk external toothed lock washer for asse
mbly
622 GB/T 9074.29-1988 自攻螺钉组合件用平垫圈 Samll wasner for tapping screw assembly
623 GB/T 9074.30-1988 自攻螺钉组合件用大垫圈 Big washer for tapping screw assembly
624 GB/T 9112-1988 钢制管法兰类型 Types for steel pipe flanges
625 GB/T 9113.1-1988 PN1.6MPa(16bar) 平面整体钢制管法兰 Integral steel pipe flanges with fla
t face for PN1.6 MPa(16 bar)
626 GB/T 9113.2-1988 PN 2.0MPa(20bar)平面整体钢制管法兰 Integral steel pipe flanges with fla
t face for PN 2.0 MPa(20bar)
627 GB/T 9113.3-1988 PN 1.6MPa(16 bar)凸面整体钢制管法兰 Integral steel pipe flanges with ra
ised face for PN1.6 MPa(16 bar)
628 GB/T 9113.4-1988 PN 2.5MPa(25 bar)凸面整体钢制管法兰 Integral steel pipe flanges with ra
ised face for PN2.5 MPa(25 bar)
629 GB/T 9113.5-1988 PN 4.0MPa(40 bar)凸面整体钢制管法兰 Integral steel pipe flanges with ra
ised face for PN4.0 MPa(40 bar)
630 GB/T 9113.6-1988 PN 2.0MPa(20 bar)凸面整体钢制管法兰 Integral steel pipe flanges with ra
ised face for PN2.0 MPa (20 bar)
631 GB/T 9113.7-1988 PN 5.0MPa(50 bar) 凸面整体钢制管法兰 Integral steel pipe flanges with r
aised face for PN5.0 MPa (50 bar)
632 GB/T 9113.8-1988 PN 10.0MPa(100 bar) 凸面整体钢制管法兰 Integral steel pipe flanges with
raised face for PN10.0MPa(100 bar)
633 GB/T 9113.9-1988 PN 1.6MPa(16 bar) 凹凸面整体钢制管法兰 Integral steel pipe flanges with
male and female face for PN 1.6MPa (16 bar)
634 GB/T 9113.10-1988 PN 2.5MPa(25 bar) 凹凸面整体钢制管法兰 Integral steel pipe flanges wit
h male and female face for PN 2.5MPa (25 bar)
635 GB/T 9113.11-1988 PN 4.0MPa(40 bar) 凹凸面整体钢制管法兰 Integral steel pipe flanges wit
h male and female face for PN 4.0MPa (40 bar)
636 GB/T 9113.12-1988 PN 5.0MPa(50 bar) 凹凸面整体钢制管法兰 Integral steel pipe flanges wit
h male and female face for PN 5.0MPa (50 bar)
637 GB/T 9113.13-1988 PN 10.0MPa(100 bar) 凹凸面整体钢制管法兰 Integral steel pipe flanges w
ith male and female face for PN 10.0MPa (100 bar)
638 GB/T 9113.14-1988 PN 15.0MPa(150 bar)凹凸面整体钢制管法兰 Integral steel pipe flanges wi
th male and female face for PN 15.0 MPa (150 bar)
639 GB/T 9113.15-1988 PN 25.0MPa(250 bar) 凹凸面整体钢制管法兰 Integral steel pipe flanges w
ith male and female face for PN 25.0MPa (250 bar)
640 GB/T 9113.16-1988 PN 1.6MPa(16 bar) 榫槽面整体钢制管法兰 Integral steel pipe flanges wit
h tongue and groove face for PN1.6MPa(16 bar)
641 GB/T 9113.17-1988 PN 2.5MPa(25 bar) 榫槽面整体钢制管法兰 Integral steel pipe flanges wit
h tongue and groove face for PN 2.5 MPa (25 bar)
642 GB/T 9113.18-1988 PN 4.0MPa(40 bar) 榫槽面整体钢制管法兰 Integral steel pipe flanges wit
h tongue and groove face for PN4.0MPa(40 bar)
643 GB/T 9113.19-1988 PN 5.0MPa(50 bar) 榫槽面整体钢制管法兰 Integral steel pipe flanges wit
h tongue and groove face for PN 5.0 MPa (50 bar)
644 GB/T 9113.20-1988 PN 10.0MPa(100 bar) 榫槽面整体钢制管法兰 Integral steel pipe flanges w
ith tongue and groove face for PN 10.0MPa (100 bar)
645 GB/T 9113.21-1988 PN 2.0MPa(20 bar) 环连接面整体钢制管法兰 Integral steel pipe flanges w
ith ring-joint face for PN 2.0MP(20 bar)
646 GB/T 9113.22-1988 PN 5.0MPa(50 bar) 环连接面整体钢制管法兰 Integral steel pipe flanges w
ith ring-joint face for PN 5.0MPa(50bar)
647 GB/T 9113.23-1988 PN 10.0MPa(100 bar) 环连接面整体钢制管法兰 Integral steel pipe flanges
with ring-joint face for PN 10.0MPa (100 bar)
648 GB/T 9113.24-1988 PN 15.0MPa(150 bar) 环连接面整体钢制管法兰 Integral steel pipe flanges
with ring-joint face for PN 15.0MPa (150 bar)
649 GB/T 9113.25-1988 PN 25.0MPa(250 bar) 环连接面整体钢制管法兰 Integral steel pipe flanges
with ring-joint face for PN 25.0MPa (250 bar)
650 GB/T 9113.26-1988 PN 42.0MPa(420 bar) 环连接面整体钢制管法兰 Integral steel pipe flanges
with ring-joint face for PN 42.0MPa (420 bar)
651 GB/T 9114.1-1988 PN 0.6MPa(6 bar)凸面带颈螺纹钢制管法兰 Hubbed screwed steel pipe flanges
with raised face for PN 0.6MPa (6 bar)
652 GB/T 9114.2-1988 PN 1.0MPa(10 bar) 凸面带颈螺纹钢制管法兰 Hubbed screwed steel pipe
flanges with raised face for PN 1.0MPa (10 bar)
653 GB/T 9114.3-1988 PN 2.5MPa(25 bar) 凸面带颈螺纹钢制管法兰 Hubbed screwed steel pipe
flanges with raised face for PN 2.5MP (25 bar)
654 GB/T 9115.1-1988 PN 0.25MPa(2.5 bar) 平面对焊钢制管法兰 Steel pipe welding neck flanges
with flat face for PN 0.25MPa (2.5 bar)
655 GB/T 9115.2-1988 PN 0.6MPa(6 bar)平面对焊钢制管法兰 Steel pipe welding neck flanges with
flat face for PN 0.6MPa (6 bar)
656 GB/T 9115.3-1988 PN 1.0MPa(10 bar)平面对焊钢制管法兰 Steel pipe welding neck flanges with
flat face for PN1.0MPa (10 bar)
657 GB/T 9115.4-1988 PN 1.6MPa(16 bar) 平面对焊钢制管法兰 Steel pipe welding neck flanges
with flat face for PN1.6MPa (16 bar)
658 GB/T 9115.5-1988 PN 2.0MPa(20 bar) 平面对焊钢制管法兰 Steel pipe welding neck flanges
with flat face for PN2.0MPa (20 bar)
659 GB/T 9115.6-1988 PN 0.25MPa(2.5 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 0.25MPa (2.5 bar)
660 GB/T 9115.7-1988 PN 0.6MPa(6 bar)凸面对焊钢制管法兰 Steel pipe welding neck flanges with
raised face for PN 0.6MPa (6 bar)
661 GB/T 9115.8-1988 PN 1.0MPa(10 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 1.0MPa (10 bar)
662 GB/T 9115.9-1988 PN 1.6MPa(16 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 1.6MPa (16 bar)
663 GB/T 9115.10-1988 PN 2.5MPa(25 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 2.5MPa (25 bar)
664 GB/T 9115.11-1988 PN 4.0MPa(40 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 4.0MPa (40 bar)
665 GB/T 9115.12-1988 PN 2.0MPa(20 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 2.0MPa (20 bar)
666 GB/T 9115.13-1988 PN 5.0MPa(50 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 5.0MPa (50 bar)
667 GB/T 9115.14-1988 PN 10.0MPa(100 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 10.0MPa (100 bar)
668 GB/T 9115.15-1988 PN 15.0MPa(150 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 15.0MPa (150 bar)
669 GB/T 9115.16-1988 PN 25.0MPa(250 bar) 凸面对焊钢制管法兰 Steel pipe welding neck flanges
with raised face for PN 25.0MPa (250 bar)
670 GB/T 9115.17-1988 PN 1.6MPa(16 bar) 凹凸面对焊钢制管法兰 Steel pipe welding neck flanges
with male and female face for PN 1.6 MPa (16 bar)
671 GB/T 9115.18-1988 PN 2.5MPa(25 bar) 凹凸面对焊钢制管法兰 Steel pipe welding neck flanges
with male and female face for PN 2.5MPa (25 bar)
672 GB/T 9115.19-1988 PN 4.0MPa(40 bar) 凹凸面对焊钢制管法兰 Steel pipe welding neck flanges
with male and female face for PN 4.0MPa (40 bar)
673 GB/T 9115.20-1988 PN 5.0MPa(50 bar) 凹凸面对焊钢制管法兰 Steel pipe welding neck flanges
with male and female face for PN 5.0MPa (50 bar)
674 GB/T 9115.21-1988 PN 10.0MPa(100 bar) 凹凸面对焊钢制管法兰 Steel pipe welding neck
flanges with male and female face for PN 10.0MPa (100 bar)
675 GB/T 9115.22-1988 PN15.0MPa(150 bar) 凹凸面对焊钢制管法兰 Steel pipe welding neck flanges
with male and female face for PN 15.0MPa (150 bar)
676 GB/T 9115.23-1988 PN 25.0 MPa(250bar)凹凸面对焊钢制管法兰 Steel pipe welding neck flanges
with male and female face for PN 25.0MPa (250 bar)
677 GB/T 9115.24-1988 PN 1.6 MPa (16 bar)榫槽面对焊钢制管法兰 Steel pipe welding neck flanges
with tongue and groove face for PN 1.6MPa (16 bar)
678 GB/T 9115.25-1988 PN 2.5 MPa (25 bar) 榫槽面对焊钢制管法兰 Steel pipe welding neck
flanges with tongue and groove face for PN 2.5MPa (25 bar)
679 GB/T 9115.26-1988 PN 4.0 MPa (40 bar)榫槽面对焊钢制管法兰 Steel pipe welding neck flanges
with tongue and groove face for PN 4.0MPa (40 bar)
680 GB/T 9115.27-1988 PN 5.0 MPa(50 bar) 榫槽面对焊钢制管法兰 Steel pipe welding neck flanges
with tongue and groove face for PN 5.0MP (50 bar)
681 GB/T 9115.28-1988 PN 10.0MPa(100 bar) 榫槽面对焊钢制管法兰 Steel pipe welding neck
flanges with tongue and groove face for PN 4.0MPa (40 bar)
682 GB/T 9115.29-1988 PN 15.0MPa(150 bar) 榫槽面对焊钢制管法兰 Steel pipe welding neck
flanges with tongue and groove face for PN 15.0MPa (150 bar)
683 GB/T 9115.30-1988 PN 25.0MPa(250 bar) 榫槽面对焊钢制管法兰 Steel pipe welding neck
flanges with tongue and groove face for PN 15.0MPa (150 bar)
684 GB/T 9115.31-1988 PN 2.0MPa(20 bar) 环连接面对焊钢制管法兰 Steel pipe welding neck
flanges with ring-joint face for PN 2.0MPa (20 bar)
685 GB/T 9115.32-1988 PN 5.0MPa(50 bar) 环连接面对焊钢制管法兰 Steel pipe welding neck
flanges with ring-joint face for PN 5.0NPa (50 bar)
686 GB/T 9115.33-1988 PN 10.0MPa(100 bar) 环连接面对焊钢制管法兰 Steel pipe welding neck
flanges with ring-joint face for PN10.0MPa (100 bar)
687 GB/T 9115.34-1988 PN 15.0MPa(150 bar) 环连接面对焊钢制管法兰 Steel pipe welding neck
flanges with ring-joint face for PN 15.0MPa (150 bar)
688 GB/T 9115.35-1988 PN 25.0MPa(250 bar) 环连接面对焊钢制管法兰 Steel pipe welding neck
flanges with ring-joint face for PN 25.0MPa (250 bar)
689 GB/T 9115.36-1988 PN 42.0MPa(420 bar) 环连接面对焊钢制管法兰 STEEL pipe welding neck
flanges with ring-joint face for PN 42MPa (420 bar)
690 GB/T 9116.1-1988 PN 1.0MPa(10 bar) 平面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with flat face for PN 1.0MPa (10 bar)
691 GB/T 9116.2-1988 PN 1.6MPa(16 bar) 平面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with flat face for PN 1.6 MPa (16 bar)
692 GB/T 9116.3-1988 PN 2.0MPa(20 bar) 平面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with flat face for PN 2.0MPa (20 bar)
693 GB/T 9116.4-1988 PN 1.0MPa(10 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 1.0MPa (10 bar)
694 GB/T 9116.5-1988 PN 1.6MPa(16 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 1.6MPa (16 bar)
695 GB/T 9116.6-1988 PN 2.5MPa(25 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 2.5MPa (25 bar)
696 GB/T 9116.7-1988 PN 4.0MPa(40 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 4.0MPa (40 bar)
697 GB/T 9116.8-1988 PN 2.0MPa(20 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 2.0MPa (20 bar)
698 GB/T 9116.9-1988 PN 5.0MPa(50 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 5.0MPa (50 bar)
699 GB/T 9116.10-1988 PN 10.0MPa(100 bar) 凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with raised face for PN 10.0MPa (100 bar)
700 GB/T 9116.11-1988 PN 1.6MPa(16 bar) 凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with male and female face for PN 1.6MPa (16 bar)
701 GB/T 9116.12-1988 PN 2.5MPa(25 bar) 凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with male and female face for PN 2.5MPa (25 bar)
702 GB/T 9116.13-1988 PN 4.0MPa(40 bar) 凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with male and female face for PN 4.0MPa (40 bar)
703 GB/T 9116.14-1988 PN 5.0MPa(50 bar) 凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with male and female face for PN 5.0MPa (50 bar)
704 GB/T 9116.15-1988 PN 10.0MPa(100 bar) 凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with male and female face for PN 10.OMPa (100 bar)
705 GB/T 9116.16-1988 PN 1.6MPa(16 bar) 榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with tongue and groove face for PN 1.6MPa (16 bar)
706 GB/T 9116.17-1988 PN 2.5MPa(25 bar) 榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with tongue and groove face for PN2.5MPa (25 bar)
707 GB/T 9116.18-1988 PN 4.0MPa(40 bar) 榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with tongue and groove face for PN 4.0MPa (40 bar)
708 GB/T 9116.19-1988 PN 5.0MPa(50 bar) 榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding steel
pipe flanges with tongue and groove face for PN 5.0MPa (50 bar)
709 GB/T 9116.20-1988 PN 10.0MPa(100 bar) 榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with tongue and groove face for PN 10.0MPa (100 bar)
710 GB/T 9116.21-1988 PN 2.0MPa(20 bar) 环连接面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with ring-joint face for PN 2.0MPa (20 bar)
711 GB/T 9116.22-1988 PN 5.0MPa(50 bar) 环连接面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with ring-joint face for PN 5.0MPa (50 bar)
712 GB/T 9116.23-1988 PN 10.0MPa(100 bar) 环连接面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with ring-joint face for PN 10.0MPa (100 bar)
713 GB/T 9116.24-1988 PN 15.0MPa(150 bar) 环连接面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with ring-joint face for PN 15.0MPa (150 bar)
714 GB/T 9116.25-1988 PN 25.0MPa(250 bar) 环连接面带颈平焊钢制管法兰 Hubbed slip-on-welding
steel pipe flanges with ring-joint face for PN 25.0MPa (250 bar)
715 GB/T 9117.1-1988 PN 2.0MPa(20 bar) 平面带颈承插焊钢制管法兰 Hubbed socked welding steel
pipe flanges with flat face for PN 2.0MPa (20 bar)
716 GB/T 9117.2-1988 PN 2.0MPa(20 bar) 凸面带颈承插焊钢制管法兰 Hubbed socket welding steel
pipe flanges with raised face for PN 2.0MPa (20 bar)
717 GB/T 9117.3-1988 PN 5.0MPa(50 bar) 凸面带颈承插焊钢制管法兰 Hubbed socket welding steel
pipe flanges with raised face for PN 5.0MPa (50 bar)
718 GB/T 9117.4-1988 PN 10.0MPa(100 bar) 凸面带颈承插焊钢制管法兰 Hubbed socket welding steel
pipe flanges with raised face for PN 10.0MPa (100 bar)
719 GB/T 9117.5-1988 PN 5.0MPa(50 bar) 凹凸面带颈承插焊钢制管法兰 Hubbed socket welding steel
pipe flanges with male and female face for PN 5.0MPa (50 bar)
720 GB/T 9117.6-1988 PN 10.0MPa(100 bar) 凹凸面带颈承插焊钢制管法兰 Hubbed socket welding
steel pipe flanges with male and female face for PN 10.0MPa (100 bar)
721 GB/T 9117.7-1988 PN 5.0MPa(50 bar) 榫槽面带颈承插焊钢制管法兰 Hubbed socket welding steel
pipe flanges with tongue and groove face for PN 5.0MPa (50 bar)
722 GB/T 9117.8-1988 PN 10.0MPa(100 bar) 榫槽面带颈承插焊钢制管法兰 Hubbed socket welding
steel pipe flanges with tongue and groove face for PN 10.0MPa (100 bar)
723 GB/T 9118.1-1988 PN 2.0MPa(20 bar) 凸面对焊环松套带颈钢制管法兰 Loose hubbed steel pipe
flanges with welding neck collar with raised face for PN 2.0MPa (20 bar)
724 GB/T 9118.2-1988 PN 5.0MPa(50 bar) 凸面对焊环松套带颈钢制管法兰 Loose hubbed steel pipe
flanges with welding neck collar with raised face for PN 5.0MPa (50 bar)
725 GB/T 9118.3-1988 PN 2.0MPa(20 bar) 环连接面对焊环松套带颈钢制管法兰 Loose hubbed steel
pipe flanges with welding neck collar with ring-joint face for PN 2.0MPa (20 bar)
726 GB/T 9118.4-1988 PN 5.0MPa(50 bar) 环连接面对焊环松套带颈钢制管法兰 Loose hubbed steel
pipe flanges with welding neck collar with ring-joint face for PN 5.0MPa (50 bar)
727 GB/T 9118.5-1988 PN 10.0MPa(100 bar) 环连接面对焊环松套带颈钢制管法兰 Loose hubbed steel
pipe flanges with welding neck collar with ring-joint face for PN 10.0MPa (100 bar)
728 GB/T 9118.6-1988 PN 15.0MPa(150 bar) 环连接面对焊环松套带颈钢制管法兰 Loose hubbed steel
pipe flanges with welding neck collar with ring-joint face for PN 15.0MPa (150 bar)
729 GB/T 9118.7-1988 PN 25.0MPa(250 bar) 环连接面对焊环松套带颈钢制管法兰 Loose hubbed steel
pipe flanges with welding neck collar with ring-joint face for PN 25.0MPa (250 bar)
730 GB/T 9118.8-1988 PN 42.0MPa(420 bar) 环连接面对焊环松套带颈钢制管法兰 Loose hubbed steel
pipe flanges with welding neck collar with ring-joint face for PN 42.0MPa (420 bar)
731 GB/T 9119.1-1988 PN 0.25MPa(2.5 bar) 平面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with flat face for PN 0.25MPa (2.5 bar)
732 GB/T 9119.2-1988 PN 0.6MPa(6 bar)平面板式平焊钢制管法兰 Slip-on welding plate steel pipe
flanges with flat face for PN 0.6MPa (6 bar)
733 GB/T 9119.3-1988 PN 1.0MPa(10 bar) 平面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with flat face for PN 1.0MPa (10 bar)
734 GB/T 9119.4-1988 PN 1.6MPa(16 bar) 平面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with flat face for PN 1.6MPa (16 bar)
735 GB/T 9119.5-1988 PN 0.25MPa(2.5 bar) 凸面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with raised face for PN 0.25MPa (2.5 bar)
736 GB/T 9119.6-1988 PN 0.6MPa(6 bar)凸面板式平焊钢制管法兰 Slip-on welding plate steel pipe
flanges with raised face for PN 0.6MPa (6 bar)
737 GB/T 9119.7-1988 PN1.0MPa(10 bar) 凸面板式平焊钢制管法兰 Slip-on welding plate steel pipe
flanges with raised face for PN 1.0MPa (10 bar)
738 GB/T 9119.8-1988 PN 1.6MPa(16 bar) 凸面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with raised face for PN 1.6MPa (16 bar)
739 GB/T 9119.9-1988 PN 2.5MPa(25 bar) 凸面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with raised face for PN 2.5MPa (25 bar)
740 GB/T 9119.10-1988 PN 4.0MPa(40 bar) 凸面板式平焊钢制管法兰 Slip-on welding plate steel
pipe flanges with reised face for PN 4.0MPa (40 bar)
741 GB/T 9120.1-1988 PN 2.5MPa(25 bar) 凸面对焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with welding neck collar with raised face for PN 2.5MPa (25 bar)
742 GB/T 9120.2-1988 PN 4.0MPa(40 bar) 凸面对焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with welding neck collar with raised face for PN 4.0MPa (40 bar)
743 GB/T 9120.3-1988 PN 2.5MPa(25 bar) 凹凸面对焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with welding neck collar with male and female face for PN2.5MPa (25 bar)
744 GB/T 9120.4-1988 PN 4.0MPa(40 bar) 凹凸面对焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with welding neck collar with male and female face for PN 4.0MPa (40 bar)
745 GB/T 9120.5-1988 PN 2.5MPa(25 bar) 榫槽面对焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with welding neck collar with tongue and groove face for PN 2.5MPa (25 bar)
746 GB/T 9120.6-1988 PN 4.0MPa(40 bar) 榫槽面对焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with welding neck collar with tongue ans groove face for PN 40MPa (40 bar)747 GB/T
9121.1-1988 PN 0.6MPa(6 bar)凸面平焊环松套板式钢制管法兰 Loose plate steel pipe flanges with
weld-on-collar with raised face for PN 0.6MPa (6 bar)
748 GB/T 9121.2-1988 PN 1.0MPa(10 bar) 凸面平焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with weld-on collar with raised face for PN 1.0MPa (10 bar)
749 GB/T 9121.3-1988 PN 1.6MPa(16 bar) 凸面平焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with weld-on collar with raised face for PN 1.6MPa (16 bar)
750 GB/T 9121.4-1988 PN 2.5MPa(25 bar) 凸面平焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with weid-on collar with raised face for PN 2.5MPa (25 bar)
751 GB/T 9121.5-1988 PN 1.6MPa(16 bar) 凹凸面平焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with weld-on collar with male and female face for PN 1.6MPa (16 bar)
752 GB/T 9121.6-1988 PN 2.5MPa(25 bar) 凹凸面平焊环松套板式钢制管法兰 Loose plate steel pipe
flanges with weld-on collar with male and female face for PN 2.5MPa (25 bar)
753 GB/T 9122.1-1988 PN 0.6MPa(6 bar)板式翻边松套钢制管法兰 Loose plate steel pipe flanges w
ith lapped pipe end for PN 0.6MPa (6 bar)
754 GB/T 9122.2-1988 PN 1.0MPa(10 bar) 板式翻边松套钢制管法兰 Loose plate steel pipe flanges
with lapped pipe end for PN 1.0MPa (10 bar)
755 GB/T 9123.1-1988 PN 0.25MPa(2.5 bar) 平面钢制管法兰盖 Steel pipe blank flanges with flat
face for PN 0.25MPa (2.5 bar)
756 GB/T 9123.2-1988 PN 0.6MPa(6 bar)平面钢制管法兰盖 Steel pipe blank flanges with flat fac
e for PN 0.6MPa (6 bar)
757 GB/T 9123.3-1988 PN 1.0MPa(10 bar) 平面钢制管法兰盖 Steel pipe blank flanges with flat f
ace for PN 1.0MPa (10 bar)
758 GB/T 9123.4-1988 PN 1.6MPa(16 bar) 平面钢制管法兰盖 Steel pipe blank flanges with flat f
ace for PN 1.6MPa (16 bar)
759 GB/T 9123.5-1988 PN 2.0MPa(20 bar) 平面钢制管法兰盖 Steel pipe blank flanges with flat f
ace for PN 2.0MPa (20 bar)
760 GB/T 9123.6-1988 PN 0.25MPa(2.5 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with rais
ed face for PN 0.25MPa (25 bar)
761 GB/T 9123.7-1988 PN 0.6MPa(6 bar)凸面钢制管法兰盖 Steel pipe blank flanges with raised f
ace for PN 0.6MPa (6 bar)
762 GB/T 9123.8-1988 PN 1.0MPa(10 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with raised
face for PN 1.0MPa (10 bar)
763 GB/T 9123.9-1988 PN 1.6MPa(16 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with raised
face for PN 1.6MPa (16 bar)
764 GB/T 9123.10-1988 PN 2.5MPa(25 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with raise
d face for PN 2.5MPa (25 bar)
765 GB/T 9123.11-1988 PN 4.0MPa(40 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with raise
d face for PN 4.0MPa (40 bar)
766 GB/T 9123.12-1988 PN 2.0MPa(20 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with raise
d face PN 2.0MPa (20 bar)767 GB/T 9123.13-1988 PN 5.0MPa(50 bar) 凸面钢制管法兰盖 Steel pipe
blank flanges with raised face for PN 5.0MPa (50 bar)
768 GB/T 9123.14-1988 PN 10.0MPa(100 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with rai
sed face for PN 10.0MPa (100 bar)
769 GB/T 9123.15-1988 PN 15.0MPa(150 bar) 凸面钢制管法兰盖 Steel pipe blank flanges raised f
ace for PN 15.0MPa (150 bar)
770 GB/T 9123.16-1988 PN 25.0MPa(250 bar) 凸面钢制管法兰盖 Steel pipe blank flanges with rai
sed face for PN 25.0MPa (250 bar)
771 GB/T 9123.17-1988 PN 1.6MPa(16 bar) 凹凸面钢制管法兰盖 Steel pipe blank fanges with male
and female face for PN 1.6MPa (16 bar)
772 GB/T 9123.18-1988 PN 2.5MPa(25 bar) 凹凸面钢制管法兰盖 Steel pipe blank flanges with mal
e and female face for PN 2.5MPa (25 bar)
773 GB/T 9123.19-1988 PN 4.0MPa(40 bar) 凹凸面钢制管法兰盖 Steel pipe blank flanges with mal
e and female face for PN 4.0MPa (40 bar)
774 GB/T 9123.20-1988 PN 5.0MPa(50 bar) 凹凸面钢制管法兰盖 Steel pipe blank flanges with mal
e and female face for PN 5.0MPa (50 bar)
775 GB/T 9123.21-1988 PN 10.0MPa(100 bar) 凹凸面钢制管法兰盖 Steel pipe blank flanges with m
ale and female face for PN 10.0MPa (100 bar)
776 GB/T 9123.22-1988 PN 15.0MPa(150 bar) 凹凸面钢制管法兰盖 Steel pipe blank flanges with m
ale and female face for PN 15.0MPa (150 bar)
777 GB/T 9123.23-1988 PN 25.0MPa(250 bar) 凹凸面钢制管法兰盖 Steel pipe blank flanges with m
ale and female face for PN 25.0MPa (250 bar)
778 GB/T 9123.24-1988 PN 1.6MPa(16 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with ton
gue and groove face for PN 1.6MPa (16 bar)
779 GB/T 9123.25-1988 PN 2.5MPa(25 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with ton
ges and groove face for PN 2.5MPa (25 bar)
780 GB/T 9123.26-1988 PN 4.0MPa(40 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with ton
gue and groove face for PN 4.0MPa (40 bar)
781 GB/T 9123.27-1988 PN 5.0MPa(50 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with ton
gue and groove face for PN 5.0MPa (50 bar)
782 GB/T 9123.28-1988 PN 10.0MPa(100 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with t
ongue and groove face for PN 10.0MPa (100 bar)
783 GB/T 9123.29-1988 PN 15.0MPa(150 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with t
ongue and groove face for PN 15.0MPa (150 bar)
784 GB/T 9123.30-1988 PN 25.0MPa(250 bar) 榫槽面钢制管法兰盖 Steel pipe blank flanges with t
ongue and groove face for PN 25.0MPa (250 bar)
785 GB/T 9123.31-1988 PN 2.0MPa(20 bar) 环连接面钢制管法兰盖 Steel pipe blank flanges with r
ing-joint face for PN 2.0MPa (20 bar)
786 GB/T 9123.32-1988 PN 5.0MPa(50 bar) 环连接面钢制管法兰盖 Steel pipe blank flanges with r
ing-joint face for PN 5.0MPa (50 bar)
787 GB/T 9123.33-1988 PN 10.0MPa(100 bar) 环连接面钢制管法兰盖 Steel pipe blank flanges with
ring-joint face for PN 10.0MPa (100 bar)
788 GB/T 9123.34-1988 PN 15.0MPa(150 bar) 环连接面钢制管法兰盖 Steel pipe blank flanges with
ring-joint face for PN 15.0MPa (150 bar)
789 GB/T 9123.35-1988 PN 25.0MPa(250 bar) 环连接面钢制管法兰盖 Steel pipe blank flanges with
ring-joint face for PN 25.0MPa (250 bar)
790 GB/T 9123.36-1988 PN 42.0MPa(420 bar) 环连接面钢制管法兰盖 Steel pipe blank flanges with
ring-joint face for PN 42.0MPa (420 bar)
791 GB/T 9124-1988 钢制管法兰对焊端部 Butt-welding ends for steel pipe flanges
792 GB/T 9125-1988 钢制管法兰技术条件 Specification for steel pipe flanges
793 GB/T 9126.1-1988 平面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe f
langes with full face
794 GB/T 9126.2-1988 凸面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe f
langes with raised face
795 GB/T 9126.3-1988 凹凸面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe
flanges with male and female face
796 GB/T 9126.4-1988 榫槽面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe
flanges with tongue and groove face
797 GB/T 9128.1-1988 钢制管法兰连接用八角形金属环垫 Octagonal metallic ring gaskets for stee
l pipe flanges joints
798 GB/T 9128.2-1988 钢制管法兰连接用椭圆形金属环垫 Oval metallic ring gaskets for steel pip
e flange joints
799 GB/T 9129-1988 钢制管法兰用石棉橡胶垫片技术条件 Specification for asbestos rubber gasket
s for steel pipe flanges
800 GB/T 9130-1988 钢制管法兰连接用金属环垫技术条件 Specification for metallic ring gaskets
for steel pipe flange joints
~
801 GB/T 9131-1988 钢制管法兰压力温度等级 Pressure-temperature ratings for steel pipe flange
s
802 GB/T 9149-1988 磁粉离合器通用技术条件 General specification for magnetic particle clutch
803 GB/T 9150-1988 带座外球面球轴承 分类 Bearing units—Classification
804 GB/T 9161-1988 杆端关节轴承 外形尺寸 Spherical plain bearing rod ends—Boundary dimensio
ns
805 GB/T 9162-1990 推力关节轴承外形尺寸 Spherical plain thrust bearings—Boundary dimensions
806 GB/T 9163-1990 向心关节轴承外形尺寸 Spherical plain radial bearings, joint type—Boundar
y dimensions
807 GB/T 9164-1990 角接触关节轴承外形尺寸 Angular contact spherical plain bearings—Boundary
dimensions
808 GB/T 9456-1988 十字槽凹穴六角自攻螺钉 Cross recessed hexagon head tapping screws with in
dentation
809 GB/T 9457-1988 1 型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts, style l--Fi
ne pitch thread--Product grades A and B
810 GB/T 9458-1988 2 型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts, style 2--Fi
ne pitch thread--Product grades A and B
811 GB/T 9459-1988 六角开槽薄螺母 细牙 A和B级 Hexagon thin slotted nuts--Fine pitch thread--
Product grades A and B
812 GB/T 9785-1988 链条、链轮术语 Terminology of chains and chainwheels
813 GB/T 10042-1988 离合器术语 Clutch--Terminology
814 GB/T 10043-1988 离合器分类 Clutch--Classification
815 GB/T 10062-1988 锥齿轮承载能力计算方法 Methods for the calculation of load capacity for
bevel gears
816 GB/T 10063-1988 通用机械渐开线圆柱齿轮 承载能力简化计算方法 Simplified methods for the c
alculation of load capacity of involute cylindrical gears for general machines
817 GB/T 10081-1988 矩形内花键 长度系列 Straight-sided internal spline--Length series
818 GB/T 10085-1988 圆柱蜗杆传动基本参数 Basic parameters of cylindrical worm gears
819 GB/T 10086-1988 圆柱蜗杆、蜗轮术语及代号 Terminology and symbols for cylindrical worm an
d worm wheel
820 GB/T 10087-1988 圆柱蜗杆基本齿廓 Basic tooth profile of cylindrical worm
821 GB/T 10088-1988 圆柱蜗杆模数和直径 Module and diameter of cylindrical worm
822 GB/T 10089-1988 圆柱蜗杆、蜗轮精度 Accuracy of cylindrical worm and wormwheel
823 GB/T 10090-1988 圆柱齿轮减速器基本参数 Basic parameters for cylindrical gear units
824 GB/T 10095-1988 渐开线圆柱齿轮精度 Accuracy of involute cylindrical gears
825 GB/T 10096-1988 齿条精度 Accuracy of rack
826 GB/T 10107.1-1988 摆线针轮行星传动 基本术语 Basic terminology of cycloidal drives
827 GB/T 10107.2-1988 摆线针轮行星传动 图示方法 Representation of drawings for cycloidal dri
ves
828 GB/T 10107.3-1988 摆线针轮行星传动 几何要素代号 Symbols of geometrical data for cycloida
l drives
829 GB/T 10224-1988 小模数锥齿轮基本齿廓 Basic rack tooth profile of fine-pitch bevel gears
830 GB/T 10225-1988 小模数锥齿轮精度 Accuracy of fine-pitch bevel gears
831 GB/T 10226-1988 小模数圆柱蜗杆基本齿廓 Basic rack tooth profile of fine-pitch cylindrica
l worm
832 GB/T 10227-1988 小模数圆柱蜗杆、蜗轮精度 Accuracy of fine-pitch cylindrical worm and wor
mwheel
833 GB/T 10412-1989 普通Ｖ带轮 Grooved pulleys for classical V-belt
834 GB/T 10413-1989 窄Ｖ带轮 Grooved pulleys for narrow V-belt
835 GB/T 10414-1989 汽车同步带传动 带轮 Synchronous belt drives for automotive applications
—Pulleys
836 GB/T 10415-1989 农业机械用双面Ｖ带轮 Agricultural machinery double V-belt pulleys
837 GB/T 10416-1989 农业机械用半宽Ｖ带轮 Agricultural machinery half wide V-belt pulleys
838 GB/T 10429-1989 单级向心涡轮液力变矩器 型式和基本参数 Single-stage centripetal turbine h
ydrodynamic torque converters—Types and basic parameters
839 GB/T 10431-1989 紧固件横向振动试验方法 Transverse vibration testing method for fasteners
840 GB/T 10432-1989 无头焊钉 Headless studs for stud welding
841 GB/T 10433-1989 圆柱头焊钉 Cheese head studs for stud welding
842 GB/T 10445-1989 滑动轴承 整体轴套的轴径 Plain bearings—Shaft diameters for unsplit bush
es
843 GB/T 10446-1989 滑动轴承 整圆止推垫圈 尺寸和公差 Plain bearings—Ring type thrust washer
s made from strip—Dimensions and tolerances
844 GB/T 10447-1989 滑动轴承 半圆止推垫圈 要素和公差 Plain bearings—Pressed bimetallic half
thrust washers —Features and tolerances
845 GB/T 10614-1989 芯型弹性联轴器 Resilient coupling with core element
846 GB/T 10855-1989 传动用齿形链及链轮 Inverted tooth chains and chainwheels
847 GB/T 10856-1989 双涡轮液力变矩器通用技术条件 General specifications of double--Turbine t
orque converter
848 GB/T 11281-1989 控制微电机用齿轮减速器系列 Reduction gearhead series of electrical micro
-machine for automatic control system
849 GB/T 11355-1989 V 带传动 额定功率的计算 V-belt drives—Calculation of power ratings
850 GB/T 11357-1989 带轮的材质、表面粗糙度及平衡 Quality , Surfaceroughness and balance of t
ransmission pulleys
851 GB/T 11358-1989 平带传动 带轮直径尺寸 Flat belt drive pulleys diameters
852 GB/T 11359-1989 平带传动 平带及带轮的宽度 Flat belt drive Belt and pulleys—widths
853 GB/T 11360-1989 平带传动 带轮轮缘凸面 Flat belt drive pulleys—crowns
854 GB/T 11361-1989 同步带传动 带轮 Synchronous belt drives—Pulleys
855 GB/T 11362-1989 同步带传动 额定功率和传动中心距的计算 Synchronous belt drives—Calculati
on of power rating and drive centre distance
856 GB/T 11365-1989 锥齿轮和准双曲面齿轮 精度 Accuracy of bevel and hypoid gears
857 GB/T 11366-1989 行星传动基本术语 Basic terminology of planetary drives
858 GB/T 11367-1989 锥齿轮胶合承载能力计算方法 Methods for the calculation of scuffing load
capacity for bevel gears
859 GB/T 12220-1989 通用阀门 标志 General purpose industrial valves—Marking
860 GB/T 12221-1989 法兰连接金属阀门 结构长度 Metal valves for use in flanged pipe systems—
Face-to -face and centre-to-face dimensions
861 GB/T 12222-1989 多回转阀门驱动装置的连接 Multi-turn valve actuator attachment
862 GB/T 12223-1989 部分回转阀门驱动装置的连接 Part-turn valve actuator attachment
863 GB/T 12224-1989 钢制阀门 一般要求 General requirements for industrial steel valves
864 GB/T 12225-1989 通用阀门 铜合金铸件技术条件 General purpose industrial valves—Specifica
tion of copper alloy castings 865 GB/T 12226-1989 通用阀门 灰铸铁件技术条件 General purpose
industrial valves—Specification of flake graphite iron castings
866 GB/T 12227-1989 通用阀门 球墨铸铁件技术条件 General purpose industrial valves—Specifica
tion of spheroidal graphite iron castings
867 GB/T 12228-1989 通用阀门 碳素钢锻件技术条件 General purpose industrial valves—Specifica
tion of carbon steel forgings
868 GB/T 12229-1989 通用阀门 碳素钢铸件技术条件 General purpose industrial valves—Specifica
tion of carbon steel castings
869 GB/T 12230-1989 通用阀门 奥氏体钢铸件技术条件 General purpose industrial valves—Specifi
cation of austenitic steel castings
870 GB/T 12232-1989 通用阀门 法兰连接铁制闸阀 General purpose industrial valves—Flanged iro
n gate valves
871 GB/T 12233-1989 通用阀门 铁制截止阀与升降式止回阀 General purpose industrial valves—Cas
ting iron globe valves and lift check valves
872 GB/T 12234-1989 通用阀门 法兰和对焊连接钢制闸阀 General purpose industrial valves—Flang
ed and butt-weld steel gate valves
873 GB/T 12235-1989 通用阀门 法兰连接钢制截止阀和升降式止回阀 General purpose industrial val
ves—Flanged steel globe valves and lift check valves
874 GB/T 12236-1989 通用阀门 钢制旋启式止回阀 General purpose industrial valves—Steel swing
check valves
875 GB/T 12237-1989 通用阀门 法兰和对焊连接钢制球阀 General purpose industrial valves--Flang
ed and butt-weld end steel ball valves
876 GB/T 12238-1989 通用阀门 法兰和对夹连接蝶阀 General purpose industrial valves—Flanged a
nd wafer butterfly valves
877 GB/T 12239-1989 通用阀门 隔膜阀 General purpose industrial valves—Diaphragm valves
878 GB/T 12240-1989 通用阀门 铁制旋塞阀 General purpose industrial valves—Iron plug valves
879 GB/T 12241-1989 安全阀 一般要求 Safety valves—General requirements
880 GB/T 12242-1989 安全阀 性能试验方法 Performance test methods for safety valves
881 GB/T 12243-1989 弹簧直接载荷式安全阀 Spring loaded safety valves
882 GB/T 12244-1989 减压阀一般要求 General specification for pressure reducing valves
883 GB/T 12245-1989 减压阀 性能试验方法 Methods of performance test for pressure reducing va
lves
884 GB/T 12246-1989 先导式减压阀 Pilot-operated reducing valves
885 GB/T 12248-1989 蒸汽疏水阀 术语 Automatic steam traps—Definition of technical terms
886 GB/T 12249-1989 蒸汽疏水阀 标志 Automatic steam traps—Marking
887 GB/T 12250-1989 蒸汽疏水阀 结构长度 Automatic steam traps—Face-to-face dimensions
888 GB/T 12251-1989 蒸汽疏水阀 试验方法 Automatic steam traps—Test methods
889 GB/T 12278-1990 向心关节轴承 径向游隙 Spherical plain radial bearings, joint type—Redia
l internal clearance
890 GB/T 12368-1990 锥齿轮模数 Modules of bevel gears
891 GB/T 12369-1990 直齿及斜齿锥齿轮基本齿廓 Basic tooth profile of straight and skew bevel
gears
892 GB/T 12370-1990 锥齿轮和准双曲面齿轮 术语 Terminology for bevel and hypoid gears
893 GB/T 12371-1990 锥齿轮 图样上应注明的尺寸数据 Bevel gears—Information of the dimensiona
l data to be given on the drawing
894 GB/T 12385-1990 管法兰用垫片密封性能试验方法 Test method for sealing characteristics of
gaskets for pipe flanges
895 GB/T 12458-1990 机械式联轴器分类 Mechanical coupling—Classification
896 GB/T 12459-1990 钢制对焊无缝管件 Steel butt-welding seamless pipe fittings
897 GB/T 12473-1990 小模数圆柱齿轮减速器通用技术条件 General specification for speed reducer
with small module cylindrical gears
898 GB/T 12601-1990 谐波齿轮传动基本术语 Basic terminology of harmonic gear drive
899 GB/T 12613-1990 滑动轴承 卷制轴套 Plain bearings—Wrapped bushes
900 GB/T 12615-1990 封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets
901 GB/T 12616-1990 封闭型沉头抽芯铆钉 120 deg flush head break mandrel closed end blind riv
ets
902 GB/T 12617-1990 开口型沉头抽芯铆钉 120 deg flush head break mandrel blind rivets
903 GB/T 12618-1990 开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets
904 GB/T 12619-1990 抽芯铆钉 技术条件 Specifications for break mandrel blind rivets
905 GB/T 12621-1990 管法兰垫片 应力松弛试验方法 Test method for stress relaxation of gaskets
for pipe flanges
906 GB/T 12622-1990 管法兰垫片 压缩率及回弹率试验方法 Test method for compressibility and re
corery of gaskets for pipe flanges
907 GB/T 12759-1991 双圆弧圆柱齿轮基本齿廓 Double-circular-arc tooth profile of basic rack f
or cylindrical gears
908 GB/T 12760-1991 圆柱蜗杆、蜗轮图样上应注明的尺寸数据 Cylindrical worm and wormwheel info
rmation of the dimensional data to be given on the drawing
909 GB/T 12764-1991 滚动轴承 冲压外圈滚针轴承外形尺寸方案 Rolling bearings—Needle roller be
arings, drawn cup, without inner ring—Boundary dimension plan
910 GB/T 12765-1991 关节轴承 安装尺寸 Spherical plain bearings, joint type—Abutment and fil
let dimensions
911 GB/T 12948-1991 滑动轴承 双金属结合强度破坏性试验方法 Plain bearings—Metallic multilay
er plain bearings—Destructive testing of bond for bearing metals
912 GB/T 12949-1991 滑动轴承 覆有减摩塑料层的双金属轴套 Plain bearings—Bimetallic bushes wi
th plastic overlay
913 GB/T 13345-1992 轧机油膜轴承通用技术条件 General technical requirement of oil film beari
ng for rolling mill
914 GB/T 13401-1992 钢板制对焊管件 Steel plate butt-welding pipe fittings
915 GB/T 13402-1992 大直径碳钢管法兰 Large-diameter carbon steel pipe flanges
916 GB/T 13403-1992 大直径碳钢管法兰用垫片 Gaskets for large-diameter cabon steel pipe flang
es
917 GB/T 13404-1992 管法兰用聚四氟乙烯包复垫片 Polytetrafluoroethylene envelope gaskets for
pipe flanges
918 GB/T 13405-1992 汽车Ｖ带轮 Grooved pulleys for automotive V-belt
919 GB/T 13575.1-1992 带传动--普通Ｖ带传动 Belt drives—Classical V-belt drives
920 GB/T 13575.2-1992 带传动--窄Ｖ带传动 Belt drives—Narrow V-belt drives
921 GB/T 13672-1992 齿轮胶合承载能力试验方法 Standard test method for scuffing load capacity
of gears
922 GB/T 13680-1992 焊接方螺母 Square weld nuts
923 GB/T 13681-1992 焊接六角螺母 Hexagon weld nuts
924 GB/T 13682-1992 螺纹紧固件轴向载荷疲劳试验方法 Axial load fatigue testing for threaded f
asteners
925 GB/T 13683-1992 销 剪切试验方法 Pins and grooved pins—Shear test
926 GB/T 13799-1992 双圆弧圆柱齿轮承载能力计算方法 Methods of the calculation for load capac
ity of cylindrical gear with double-circular-arc tooth profile
927 GB/T 13806.1-1992 精密机械用紧固件 十字槽螺钉 Fasteners for fine mechanics--Cross recess
ed screws
928 GB/T 13806.2-1992 精密机械用紧固件 十字槽自攻螺钉 刮削端 Fasteners for fine mechanics--C
ross recessed tapping screws--Scrape point
929 GB/T 13807.1-1992 腰状杆螺柱连接副 型式分类 Connections with waisted stud--Tape classifi
cation
930 GB/T 13829.1-1992 槽销 平行沟槽 Grooved pins--Parallel grooved
931 GB/T 13829.2-1992 槽销 锥槽 Grooved pins--Taper grooved
932 GB/T 13829.3-1992 槽销 圆头、沉头 Grooved pins--With round head or countersunk head
933 GB/T 13924-1992 渐开线圆柱齿轮精度检验规范 Inspection code for accuracy of involute cyli
ndrical gears
934 GB/T 13927-1992 通用阀门 压力试验 Pressure testing for general purpose valves
935 GB/T 13932-1992 通用阀门铁制旋启式止回阀 General purpose industrial valves--Cast iron sw
ing check valves
936 GB/T 14118-1993 谐波传动减速器 Harmonic drive reducers
937 GB/T 14210-1993 墙板自攻螺钉 Dry wall screws
938 GB/T 14212-1993 摩托车链条 Motorcycle chains
939 GB/T 14229-1993 齿轮接触疲劳强度试验方法 Standard of test method for surface load capaci
ty of gears
940 GB/T 14230-1993 齿轮弯曲疲劳强度试验方法 Standard of test methed for bending load capaci
ty of gears
941 GB/T 14231-1993 齿轮装置效率测定方法 Determination of efficiency for gear units
942 GB/T 14382-1993 管道用三通过滤器 Tee strainers for fluids for pipes
943 GB/T 14383-1993 锻钢制承插焊管件 Forged steel socket welding pipe fittings
944 GB/T 14525-1993 波纹金属软管通用技术条件 General specification for corrugated metallic
hose assemblies
945 GB/T 14626-1993 锻钢制螺纹管件 Forged steel threaded pipe fittings
946 GB/T 14910-1994 滑动轴承 厚壁多层轴承衬背技术要求 Plain bearings--Requirements on
backings for thick-walled multilayer bearings
947 GB/T 15096-1994 液粘调速离合器 Hydroviscous variable speed clutch
948 GB/T 15185-1994 铁制和铜制球阀 Cast iron and copper alloy ball valves
949 GB/T 15188.1-1994 阀门的结构长度 对焊连接阀门 Face-to-face, centre-to-face, end-to-end
and centre-to-end dimensions of valves--Buttwelding valves
950 GB/T 15188.2-1994 阀门的结构长度 对夹连接阀门 Face-to-face, centre-to-face, end-to-end
and centre-to-end dimensions of valves--Wafer valves
951 GB/T 15188.3-1994 阀门的结构长度 内螺纹连接阀门 Face-to-face, centre-to-face, end-to-
end and centre-to-end dimensions of valves--Female screw valves
952 GB/T 15188.4-1994 阀门的结构长度 外螺纹连接阀门 Face-to-face, centre-to-face, end-to-
end and centre-to end dimensions of valves--Mals screw valves
953 GB 15382-1994 气瓶阀通用技术条件 General technique specifications for cylinder valves
954 GB 15383-1994 气瓶阀出气口连接型式和尺寸 Outlet connections and sizes for cylinder
valves
955 GB/T 15389-1994 螺杆 Threaded rods
956 GB/T 15390-1994 工程用钢制焊接弯板链和链轮 Welded steel type cranked link mill chains
and chain wheels
957 GB/T 15530.1-1995 铜合金整体铸造法兰 Cast copper alloy integral flanges
958 GB/T 15530.2-1995 铜合金对焊法兰 Copper alloy welding neck flanges
959 GB/T 15530.3-1995 铜合金板式平焊法兰 Copper alloy plate flanges for brazing or welding
960 GB/T 15530.4-1995 铜合金带颈平焊法兰 Copper alloy hubbed slip-on flanges for brazing or
welding
961 GB/T 15530.5-1995 铜合金平焊环松套板式钢法兰 Loose plate steel flanges with copper
alloy plate collar for brazing or welding
962 GB/T 15530.6-1995 铜合金对焊环松套板式钢法兰 Loose plate steel flanges with copper
alloy welding neck collar
963 GB/T 15530.7-1995 铜合金法兰盖 Copper alloy blank flanges
964 GB/T 15530.8-1995 铜合金及复合法兰 技术条件 Specifications for copper alloy and composit
e flanges
965 GB/T 15531-1995 带传动 带轮 中心距调整极限值 Belt drives--Pulleys--Limiting values for a
djustment of centres
966 GB/T 15601-1995 管法兰用金属包覆垫片 Metallic envelope gaskets for pipe flanges
967 GB/T 15700-1995 聚四氟乙烯波纹补偿器通用技术条件 General specification for polytetrafluo
roethylene bellows compensators
968 GB/T 15752-1995 圆弧圆柱齿轮基本术语 Terminology of circular-arc gear
969 GB/T 15753-1995 圆弧圆柱齿轮精度 Accuracy of cylindrical gear with circular-arc tooth pr
ofile
970 GB/T 15758-1995 花键基本术语 Basic terminology of spline
971 GB/T 15828-1995 V带和多楔带传动 节线位置的动态测定 V-and ribbed belt--Dynamic test to de
termine Pitch zone location
972 GB/T 15855.1-1995 扁圆头击芯铆钉 Flat round head drive rivets
973 GB/T 15855.2-1995 沉头击芯铆钉 Countersunk head drive rivets
974 GB/T 15855.3-1995 击芯铆钉技术条件 Specifications for drive rivets
975 GB/T 15856.1-1995 十字槽盘头自钻自攻螺钉 Cross recessed pan head self-drilling tapping s
crews
976 GB/T 15856.2-1995 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head self-drilling t
apping screws
977 GB/T 15856.3-1995 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head self-d
rilling tapping screws
978 GB/T 15856.4-1995 六角法兰面自钻自攻螺钉 Hexagon flange head self-drilling tapping screw
s
979 GB/T 16442-1996 平面二次包络环面蜗杆传动术语 Planar double-enveloping worm gearing termi
nology
980 GB/T 16443-1996 平面二次包络环面蜗杆传动几何要素代号 Planar double--enveloping worm gear
ing geometrical data symbols
981 GB/T 16444-1996 平面二次包络环面蜗杆减速器系列、润滑和承载能力 Planar double-enveloping
worm gearsreducer-dimensions and load capacitys
982 GB/T 16445-1996 平面二次包络环面蜗杆传动精度 Planar double-enveloping worm gearing accur
acy
983 GB/T 16446-1996 平面二次包络环面蜗杆减速器技术条件 Planar double-enveloping worm gearing
reducer technical specification
984 GB/T 16643-1996 滚动轴承 滚针和推力圆柱滚子组合轴承 外形尺寸 Rolling bearings--Combined
needle roller thrust roller bearings--Boundary dimensions
985 GB/T 16674-1996 六角法兰面螺栓 小系列 Hexagon flange bolts--Small series
986 GB/T 16748-1997 滑动轴承 金属轴承材料的压缩试验 Plain bearings--Compression testing of m
etallic bearing materials
987 GB/T 3481-1997 齿轮轮齿磨损和损伤术语 Cears--Wear and damage to gear teeth--Terminology
988 GB/T 16823.1-1997 螺纹紧固件应力截面积和承载面积 Stress area and bearing area for thread
ed fasteners
989 GB/T 16823.2-1997 螺纹紧固件紧固通则 General rules of tightening for threaded fasteners
990 GB/T 16823.3-1997 螺纹紧固件拧紧试验方法 Method of tightening test for threaded fastener
s
991 GB/T 16824.1-1997 六角凸缘自攻螺钉 Hexagon head tapping screws with collar
992 GB/T 16824.2-1997 六角法兰面自攻螺钉 Hexagon flange head tapping screws
993 GB/T 16848-1997 直廓环面蜗杆、蜗轮精度 Accuracy of double enveloping worm gearing with s
traight line generatrix
994 GB/T 5858-1997 重载传动用弯板滚子链和链轮 Heavy-duty cranked-link transmission roller ch
ains and chain wheels
995 GB/T 1243-1997 短节距传动用精密滚子链和链轮 Short pitch transmission precision roller ch
ains and chain wheels
996 GB/T 3931-1997 联轴器 术语 Coupling--Vocabulary
997 GB/T 1568-1997 键 技术条件 Technical specifications for keys
998 GB/T 271-1997 滚动轴承 分类 Rolling bearings--Classification
999 GB/T 16922-1997 薄型楔键及其键槽 Thin taper reys and their corresponding keyways
1000 GB/T 16940-1997 直线运动支承 直线运动球轴承 外形尺寸和公差 Linear motion bearings--Line
ar motion ball bearings--Boundary dimensions and tolerances
1001 GB/T 16938-1997 紧固件 螺栓、螺钉、螺柱和螺母通用技术条件 Fasteners--General requiremen
ts for blots,screws,studs and nuts
1002 GB/T 16939-1997 钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space gr
id structures
1003 GB/T 5279.2-1997 沉头螺钉 第2部分: 十字槽插入深度 Countersunk flat head screws--Part 2:
Penetration depth of cross recesses
1004 GB/T 819.2-1997 十字槽沉头螺钉 第2部分: 钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross rece
ssed countersunk flat head screws(common head style)--Grade A--Part 2: Steel of property cla
ss 8.8,stainless and non-ferrous metals
1005 GB/T 96-1985 大垫圈-A和C级 Plain washers--Large series--Product grades A and C
1006 GB/T 97.1-1985 平垫圈-A级 Plain washers--Normal series--Product grade A
1007 GB/T 97.2-1985 平垫圈 倒角型-A级 Plain washers--Chamfered--Normal series--Product grade
A
1008 GB/T 98-1988 止动垫圈技术条件 Specification for tab washer
1009 GB/T 99-1986 开槽圆头木螺钉 Slotted round head wood screws
1010 GB/T 100-1986 开槽沉头木螺钉 Slotted countersink head wood screws
1011 GB/T 101-1986 开槽半沉头木螺钉 Slotted raised countersunk head wood screws
1012 GB/T 102-1986 六角头木螺钉 Hexagon head wood screws
1013 GB/T 109-1986 平头铆钉 Flat head rivets
1014 GB/T 116-1986 铆钉技术条件 Specifications for rivet
1015 GB/T 117-1986 圆锥销 Taper pins
1016 GB/T 118-1986 内螺纹圆锥销 Taper pins with internal thread
1017 GB/T 119-1986 圆柱销 Parallel pins
1018 GB/T 120-1986 内螺纹圆柱销 Parallel pins with internal thread
1019 GB/T 121-1986 销技术条件 Specifications for pins
1020 GB/T 152.1-1988 紧固件 铆钉用通孔 Fasteners--Clearance holes for rivets
1021 GB/T 152.2-1988 紧固件 沉头用沉孔 Fasteners--Countersinks for countersunk head serews
1022 GB/T 152.3-1988 紧固件 圆柱头用沉孔 Fasteners--Counterbores for hexagon socket head ser
ewsand slotted cheese head screws
1023 GB/T 152.4-1988 紧固件 六角头螺栓和六角螺母用沉孔 Fasteners--Counterbores for hexagon b
olts and nuts
1024 GB/T 17116.1-1997 管道支吊架 第1部分; 技术规范 Pipe supports and hangers Part 1: Techni
cal specification 1025 GB/T 17116.2-1997 管道支吊架 第2部分: 管道连接部件 Pipe supports and
hangers Part 2: Pipe attachments 1026 GB/T 17116.3-1997 管道支吊架 第3部分: 中间连接件和建筑
结构连接件 Pipe supports and hangers Part 3: Middle connection attachments and building stru
cture attachments
1027 GB/T 3852-1997 联轴器轴孔和联结型式与尺寸 Types and dimension for coupling bores and th
eir connection
1028 GB/T 17185-1997 钢制法兰管件 Steel pipe fittings for flanged joint
1029 GB/T 17186-1997 钢制管法兰连接强度计算方法 Calculating method for strength of steel pip
e flanged joint
1030 GB/T 17197-1997 带传动 联组普通V带轮(有效宽度制) Belt drives--Grooved pulleys for joine
d classical V-belts (effective system)
1031 GB/T 11356.1-1997 带传动 普通及窄V带传动用带轮(基准宽度制) 槽形检验 Belt drives--Pulley
s for classical and narrow V-belts drives(system based on datum width)--Geometrical inspecti
on of grooves
1032 GB/T 11356.2-1997 带传动 普通及窄V带传动用带轮(有效宽度制) 槽形检验 Belt drives--Pulley
s for classical and narrow V-belts drives(system based effective width)--Geometrical inspect
ion of grooves
1033 GB/T 3480-1997 渐开线圆柱齿轮承载能力计算方法 Calculation methods of load capacity for
involute cylindrical gears
1034 GB/T 17241.1-1998 铸铁管法兰 类型 Synotic table for cast iron pipe flanges
1035 GB/T 17241.2-1998 铸铁管法兰盖 Cast iron pipe blank flanges
1036 GB/T 17241.3-1998 带颈螺纹铸铁管法兰 Hubbed threaded cast iron pipe flanges
1037 GB/T 17241.4-1998 带颈平焊和带颈承插焊铸铁管法兰 Hubbed slip-on-welding and hubbed sock
et welding cast iron pipe flanges
1038 GB/T 17241.5-1998 管端翻边带颈松套铸铁管法兰 Loose hubbed cast iron pipe flanges for la
pped pipe end
1039 GB/T 17241.6-1998 整体铸铁管法兰 Integral cast iron pipe flanges
1040 GB/T 17241.7-1998 铸铁管法兰 技术条件 Specifications for cast iron pipe flanges
1041 GB/T 8464-1998 水暖用内螺纹连接阀门 Valves with female screw ends for water-heating sys
tem
1042 GB/T 273.2-1998 滚动轴承 推力轴承 外形尺寸总方案 Rolling bearings--Thrust bearings--Bou
ndary dimensions,general plan
1043 GB/T 7813-1998 滚动轴承附件 轴承座 外形尺寸 Rolling bearings accessories--Plummer block
housings--Boundary dimensions
1044 GB/T 290-1998 滚动轴承 冲压外圈滚针轴承 外形尺寸 Rolling bearings--Needle roller bearin
gs, drawn cup without inner rings--Boundary dimensions
1045 GB/T 305-1998 滚动轴承 外圈上的止动槽和止动环 尺寸和公差 Rolling bearings--Snap ring gr
oove and snap ring on outer ring--Dimensions and tolerances
1046 GB/T 801-1998 小半圆头低方颈螺栓 B级 Cup head square neck bolts with small head and sho
rt neck--Product grade B
1047 GB/T 14-1998 大半圆头方颈螺栓 C级 Cup head square neck bolts with large head--Product g
rade C
